Jump to content
SAU Community

R34 Gtr Full Engine Cover Set With Mines Baffle Plates And Speedflow Fittings

Chris32R
 Share

Recommended Posts

Chris32R Proficient

Chris32R

Posted
Posted

Hey guys,

Selling a complete set of R34 GTR candy apple red engine covers. These were bought brand new from Nissan a couple of years ago and have only been installed for about 2000kms. The cam gear cover is unused as I never ran the car with one and the spark plug cover has only been used for a few months for the same reason. The cam covers have mines baffles and plates installed to help prevent blow by. Speedflow -12 fittings have also been installed. They've been drilled and tapped in with a npt thread so that bonnet clearance is greater than normal, perfect for someone running an rb30. There's slight scratches on the back of the cam cover from slight rubbing with the loom.but this obviously can't be seen when installed. You can also see in the photo of the right cam.cover has a small mark where a slight spot of pain has come off. This is due to the greddy piping kit I had installed rubbing on it causing it to come off. Other than that these covers are in new condition as you'd expect.

Located in Perth but happy to post interstate or overseas if required.

Price is 600 firm.

Cheers

IMG_20140430_173604_zpsuepfc6hn.jpg

DSC_0119_zpsrxpmhlr9.jpg

DSC_0121_zpsfpsfqslo.jpg

DSC_0122_zpsam2x54vi.jpg

DSC_0123_zpstpz0e1ph.jpg

DSC_0127_zps0pohy03q.jpg

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      RB26DETT Sketchy boost mod?

      By GTSBoy · Posted

      There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • ARB26
      RB26DETT Sketchy boost mod?

      By ARB26 · Posted

      Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • GTSBoy
      Cas issue

      By GTSBoy · Posted

      The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Duncan
      RB26DETT Sketchy boost mod?

      By Duncan · Posted

      Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • nash47
      Cas issue

      By nash47 · Posted

      Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...