Jump to content
SAU Community

Recommended Posts

Hello all I have a list of parts I have for sale some of the stuff I don't have photos for if you require one I can get one I'm open to offers if you have any questions shoot me a message

Scottys dump pipe $400

Scottys front pipe catless $300

Fujistubo Legalis R exhaust $900

Stagea LSD diff $350

Diff bush kit $80

Turbo smart dual port bov $250

Pair of Hid headlights $100

Ox Motorsport underbar front $120

New Ox Motorsport rear member support $150

New ox Motorsport rear underbar $120

Link G4 Fury ecu custom loom plug and play comes with 4bar map sensor and temp sensor including other wiring $3300

image.jpeg

image.jpeg

image.jpeg

image.jpeg

image.jpeg

image.jpeg

image.jpeg

image.jpeg

Link to comment
https://www.sau.com.au/forums/topic/466421-stagea-m35-parts/
Share on other sites

1 hour ago, blade511 said:

Where are you located ? If I can wrangle the cashola, I'd be keen for any and all of the braces, and the exhaust but I think that's gonna be out of reach sadly :-/

I'm located in Melbourne, unfortunately all the bars have been sold they were on hold and was waiting for a response sorry for the disappointment 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
    • No. I think it might be the AFM. Hence the use of the terms "swaptronics", which implies the use of swapping out electronics for the purpose of diagnosis. It's about the only way to prove that a small/niggling/whatever problem with an AFM or a CAS or similar is actually caused by that AFM/CAS/whatever. A known good item swapped in that still gives the same problem is likely to be caused somewhere else. They're all the same. Spraying AFMs with cleaner is an each way bet between cleaning it and f**king it.
    • Oh wow! This might actually work amazingly. Do you know the ratio of the diff? I was told the only thing you need to make sure of is if the front & rear diff ratios are the same. Ours is a 4.083 Thanks!
    • You think its the AFM? I know its a common issues on R32s. I find it coincidental how this issue raised right after cleaning the fuel system. As everything except the fuel system was fine before. I tried running it with the IACV unplugged but did not notice a difference and still stalled. However, the RPM gauge is not in the cluster right now, so I will need to connect the laptop again and use Nistune to check the RPM. I will check this weekend.
×
×
  • Create New...