Jump to content
SAU Community

Recommended Posts

Hello all,

My names Jake and I'm coming to you from the south east of England. I'm the proud owner of a series 1 R33 GTST, she's nothing special and will always be an on-going project.

I bought her 2 years ago, rusty drift missile, hadn't seen any love for a long time. My aim was to return some glory, put my own mark on the car of my dreams.

I have made mistake after mistake and learnt the hard way a few times, but where there's a will there's a SAU thread with the correct answers!

I finally decided to make an account, so I can ask the pro's directly and hopefully share some of my own experience.

Cheers lads

Link to comment
https://www.sau.com.au/forums/topic/480155-addicted-to-the-r33/
Share on other sites

Should probably add some info...

I haven't modified her heavily, should hit 300 ponies soon. Big fan of old parts that can be brought back from the grave and budget parts that i can re-engineer.

My Stage 1 general mods include:

Front and rear strut braces, nismo adjustable shocks with matching springs, EBC drilled and grooved front brake disks + yellow stuff pads, better shoes and pads on the rear, HICAS delete bar.

Performance mods:

BLITZ sus pod filter, BLITZ blow off valve and dual SBC electronic boost controller, no name FMIC, CN Turbo's 10psi wastegate actuator, tubular low mount exhaust manifold, split dump to 3" turbo back, de-cat, kakimoto un-baffled rear section and back box, bells auto sevices RB rebuild stage 1 v2 ecu.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...