Jump to content
SAU Community

Recommended Posts

So I have the car in the title, and I love that the side wing, rear view mirrors dip / point down when the car is in reverse. And as expected, they *attempt* to revert back to the original position, but fail. They appear to overshoot, and I have to manually adjust them back into position. Normally they return with a angle pointing slightly into the sky 😠

I know I can turn off the tilt on reverse, but I find it very useful when reversing out of my VERY tight garage.

Is this normal or common?

I tried the window reset type procedure. ie move to highest then to lowest. And it did not change.

Any other suggestions? Is there another trick?

I never had this problem in mine.

What about using the seat position buttons?

Don't they remember steering wheel and mirror positions?

It's not a fix but im thinking you could just press the memory button to return it to your preset position  

13 hours ago, V35_Paul said:

I never had this problem in mine.

What about using the seat position buttons?

Don't they remember steering wheel and mirror positions?

It's not a fix but im thinking you could just press the memory button to return it to your preset position  

Mine is a 2008 370GT SP Coupe,. and I have never experienced any seat position memory/return. It does not have the 1-2 buttons on the door, for different driver's. Are they the "seat position" buttons you are talking about?

I drove yesterday, and I noted that the passenger side actually returned pretty much spot on and did not need adjustment after reversing. But, the drivers side did after every reverse. Its not a total killer, as I leave the "side control" turned to the drivers side, and its becoming almost a muscle memory to tilt it down again after reversing. But obviously still not the best way to be.

4 hours ago, V35_Paul said:

yeah. 

Maybe my memory of my car is wrong. I did have 2011 V36 SP, maybe in the newer model it had them.

It was also an option on the earlier models, and another being heated seats.  I saw some when targeting my year. Neither of which mine has.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I was just driving into work and while on my drive, I went to accelerate and noticed the car would sputter/hesitate and I’d hear a few pops from the exhaust before it started going faster. Then I also noticed that when I push my clutch in, the car would die. This all started happening today. Any ideas?
    • That is a lovely Volvo, just saying. Yes I should have got an 260RS when they were cheap. I do regret now.
    • ^ lots of good points made above. The thing is, "aggressive" or "flush" fitment is relative depending on how much you have been influenced by social media. My starting point is always "look at the Nismo RWD specs". That is where you should start, then start measuring as GTSBoy as sort of mentioned, because every car will be slightly different. My 8.5"+35/9.5+38 will not be "flush" enough for you because you want more "pumped" look, which is why you measure. Tyre sizes and brand/models also make a difference. Some tyres are more chunky/square, some are more rounded. That means you could get away with more aggressive offsets without rubbing. But then it also depends on your ride height. Also depends on how much your car copped damage before being shipped from Japan. So it goes back to measuring your car yourself and determining what can work. Those Nismo specs are used bacause it's a safe spec for standard car (suspension. body) with chunky tyres. But then I put 265/35 wide tyres on R34 GT-R wheels, and currently run 285/30 tyres on 18x10 wheels.
    • Sounds pretty awesome. I recommend creating a new build thread and posting all your goodness in there.
×
×
  • Create New...