Jump to content
SAU Community

Recommended Posts

Hey guys, have had a quick search but unable to find any difinative answer to my poor idle problem with the A/C on, will be having a look at the AAC valve - anyone have any other suggestions? Oh am running the stock BOV not leaking and it idles ok with no A/C on!!!

Cheers

This probably isn't the best idea but I have been told by a few reputable mechanics/tuners that the "R33 Skylines idle too low for a 10yr old car and should be bumped up abit".

According to my RSM my manual R33 GTS-t used to idle pretty solidly between 640-660rpm. It would hunt every now and then, so I bumped it up to around 740-770rpm and it is 300% nicer when idling/at the lights/etc.

If it costs me an extra $2/wk in fuel big whoop.

Edit: Obviously make sure your Air filter / AFM are clean.

Agreed! We cleaned my mate's airflow meter the other night and it worked a treat. As Ben would concur, you may also want to try resetting your computer.

Oh - and clean your AFM with CRC Electrical Contact Cleaner - NOT CRC Carby cleaner! :(

Another possibility to consider: My rev hunting problem disappeared after i changed my fuel pump. Turned out my old fuel pump is dying and not supplying enough/stable fuel pressure to the engine, therefore causing it to sometimes hunting for rev or almost stalling on traffic lights or in crawling traffic jam. All happened either with AC on/off (was slightly better with AC off). With the new fuel pump all is nice now.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...