Jump to content
SAU Community

Recommended Posts

Question:

Hicas, when dose it work, how does it work, why does it work...

This is for me and other who would like to know...

Is all wheel steer as i know, and it works at certain speeds for handling..

Is this correct..

What speed?

Can you feel it?

I have a R32 Gtst and its got hicas... im sure it works, i swear i can feel it...

But i put it up on a hoist, put it in gear hit like all speeds turned the wheel and no rear wheel action...

Whats goin on?

Any help would be appreciated:D

Link to comment
https://www.sau.com.au/forums/topic/50006-hicas-issues/
Share on other sites

Question:

Hicas, when dose it work, how does it work, why does it work...

This is for me and other who would like to know...

Is all wheel steer as i know, and it works at certain speeds for handling..

Is this correct..

What speed?

Can you feel it?

I have a R32 Gtst and its got hicas... im sure it works, i swear i can feel it...

But i put it up on a hoist, put it in gear hit like all speeds turned the wheel and no rear wheel action...

Whats goin on?

Any help would be appreciated:D

You won't get it to work while the car is stationary unless you put it into diagnostic mode which is not straightforward.

It deflects the rear wheels differently above and below 60 km/h as less defelction is required at higher speeds.

In a nutshell the idea is to try and induce understeer for safety and for 90% of people it is probably a good idea to keep it connected.

There is a long thread on HICAS on either the handling or forced induction forum. Try an advanced search for HICAS with threads/posts by Sydneykid and you'll get the whole enchilada explanation.

Regards

Link to comment
https://www.sau.com.au/forums/topic/50006-hicas-issues/#findComment-995399
Share on other sites

Question:

Hicas, when dose it work, how does it work, why does it work...

This is for me and other who would like to know...

Is all wheel steer as i know, and it works at certain speeds for handling..

Is this correct..

What speed?

Can you feel it?

I have a R32 Gtst and its got hicas... im sure it works, i swear i can feel it...

But i put it up on a hoist, put it in gear hit like all speeds turned the wheel and no rear wheel action...

Whats goin on?

Any help would be appreciated:D

You won't get it to work while the car is stationary unless you put it into diagnostic mode which is not straightforward.

It deflects the rear wheels differently above and below 60 km/h as less defelction is required at higher speeds.

In a nutshell the idea is to try and induce understeer for safety and for 90% of people it is probably a good idea to keep it connected. What can make the car go mental is the fact that it is controlled by an old tech, slow ecu and if you are balancing oversteer on the throttle it suddeny goes 'oh I know, I'll help now by inducing understeer' with the result that it will turn the rears and reduce the friction level of the contact patch even further, possibly causing a lose. This is the time you go 'stop helping, you sh$t box'.

There is a long thread on HICAS on either the handling or forced induction forum. Try an advanced search for HICAS with threads/posts by Sydneykid and you'll get the whole enchilada explanation.

Regards

Link to comment
https://www.sau.com.au/forums/topic/50006-hicas-issues/#findComment-995403
Share on other sites

oh oh oh... yes i get you derrr.

Sorry

Try the DIY forum or the susp forum, there's a tutorial there. Good luck, there's also a lot of cases of people having a rant because the diagnostic mode procedure is so mental. It's funny seeing the car sit there and twitch it's back wheels from side to side.

Link to comment
https://www.sau.com.au/forums/topic/50006-hicas-issues/#findComment-996145
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
    • I have more than enough digging, laying blocks, moving gravel, airrating, feeding and top soiling the grass, and setting up the veggie gardens growing some seedlings,  and then removing all the unused rock to keep me busy for the next few months at least,  hopefully the rain stops soon so I can get a few hours in this arvo, but, before that Sunday is washing day, is every body happy, you bet your life we are Nice country road day drives are a day off whenever I'm muscle sore from all the landscaping at the moment, but, more epic multiple day drives will start once the majority of the big jobs outside are completed
×
×
  • Create New...