Jump to content
SAU Community

Recommended Posts

i figured coz the stagea is new i might as well be the first to get a custom made exhaust. it was done by my local performance exhaust shop, southport exhaust, and starts with stock manifold, a custom dump pipe (r33 doesn't fit coz of something) then mild steel 3in, hi flow cat and zetti muffler. All up, $1,000 bucks. immediately you notice the increase in torque and top end power and sounds awesome as well. :headspin:

Link to comment
https://www.sau.com.au/forums/topic/51626-exhaust/#findComment-1021209
Share on other sites

a custom dump pipe (r33 doesn't fit coz of something)

Oooops, It thought they were the same. The Blitz catalogue lists the same engine pipe part number for R33 GTST and WGN34 Stagea.

Blitz Front Pipe ECR33 Stegia WGNC34

¥15,360.00

img058.gif

Care to check with your exhaust guy and find out what exactly was different. It would be a great help :D

Link to comment
https://www.sau.com.au/forums/topic/51626-exhaust/#findComment-1021245
Share on other sites

Hahaha, funny how I come home and the first thread I read is this one seems I JUST picked the Stagea up from the exhaust shop !!

Just got done a turbo back 3 inch system. Custom one piece dump/front pipe, high flow cat, resonator then into a 3 inch muffler. All up it was $900 (but I supplied the cat).

They did a very nice job of it. Very tidy welds, all sits nice and snug under the car (no problems with clearance), all the mandrel bends are perfect etc.. Very happy with it.

I haven't had a chance to give it a good test yet - too much traffic around, but I'll take her out later tonight.

I've got the whole exhaust system here at home, as well as a stock R33 GTS-t dump and front pipe, so I'll be able to assemble the two and do a direct comparison of them...

I did notice that on the Nissan Fast part program, the part numbers for the Stagea front and dump pipe are the same as the R33 GTS-t dump and front pipe !!

And I just remembered that I was going to take some pics of the exhaust while it was up on the hoist.... And damn it, I forgot.... Sorry...

J

Link to comment
https://www.sau.com.au/forums/topic/51626-exhaust/#findComment-1021309
Share on other sites

I have bought a s/s cat back Apexi N1 exhaust system for my Stagea when it arrives. Will that be enough on the exhaust side of things? I read somewhere (think it was a Zoom mag) that the cats on these cars aren't that restrictive. Is this true? Should I buy a high flow cat? What else do I need?

Link to comment
https://www.sau.com.au/forums/topic/51626-exhaust/#findComment-1021761
Share on other sites

  • 2 weeks later...

hey guys i was wondering is there enough room under the stagea to run twin 3" to the rear either together or one each side, crossing over under the tailshaft or something????

i would like a complete twin 3" system (one from each turbo all the way to twin exhuast at the rear bumper)

could i fit 2 mufflers on each pipe??? and 1 cat on each??? :confused:

prolly wont fit but just asking before i purchase a stagea :jump:

i want it to be very queit and not be excessivly loud like the engine is in the vl atm with a hotdog muffler and another rear resonator, deafening is the word :uhh:

cya guys

Brad

Link to comment
https://www.sau.com.au/forums/topic/51626-exhaust/#findComment-1034422
Share on other sites

I drove an R32 GTR that had a twin 2.5 inch exhaust from the turbo back, including twin cats. It had a twin inlet/outlet resonator under the passengers floor and a twin inlet/outlet muffler at the rear. It was quiet, but had a purposeful note.

Link to comment
https://www.sau.com.au/forums/topic/51626-exhaust/#findComment-1034495
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
×
×
  • Create New...