Jump to content
SAU Community

Heathcote 16th November

PurpleR32

By PurpleR32,
in Archived Events

 Share

Recommended Posts

PurpleR32 Experienced

PurpleR32

Posted
Posted

The Turbo titles are on at Heathcote again. And I for one am going (unfortunately only to spectate at this stage).

Went to the last one (where GTR 700 made its debut) and was thoroughly impressed.

jason (rh9- 34 GTR) is ment to be making his debut as well, and there are rumours that GTR 700 will be back in action as well!!!

Expect to see the sub-zero boys, loads of WRX's & evo's and other hi-po cars. Hopefully some Big HP GTR's as well.

Link to comment
https://www.sau.com.au/forums/topic/5412-heathcote-16th-november/
Share on other sites
PurpleR32 Experienced

PurpleR32

Posted
  • Author
Posted

might be the way to go. Should ask the powers that be ;)

Just remember heathcote is about 1.5hrs away from melbourne (depending where u live), so bring a cloth to wipe off all the bugs :)

Am definetly going. Would be good to meet people from the forums

Ross

  • 2 weeks later...
PurpleR32 Experienced

PurpleR32

Posted
  • Author
Posted

Hey Ritchie

I think me and the ev are going. Have heard report of SirV making an appearance. Dont know about anyone else. R u going? That would be cool if we could meet up. Had a great time last time.

U should call the ev and arrange something. U work next doee remember :P

 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • iamhe77
      Might import a stagea

      By iamhe77 · Posted

      Not sure the US can import anything other than the C34 Stagea's, but if you can and you need to to tow, DO NOT under any circumstances get an M35 Stagea. If it is just as a family car and your country/state allows it, absolutely and definitely get an M35 (3.5L if possible as it is effectively a 350Z) over a C34.
    • iamhe77
      Stagea identification?

      By iamhe77 · Posted

      Punch your VIN (nm35-xxxxxx) into Amayama.com You can see everything there quite easily.
    • PranK
      My BMW E39 528i touring

      By PranK · Posted

      Thanks for that, I'll check it all out. I can always do the brakes last anyway if its a problem.  The 16's are super cool, if they do fit I'll cruise around with them for a bit.  
    • GTSBoy
      My BMW E39 528i touring

      By GTSBoy · Posted

      Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • Duncan
      Neil's R33 Gts-t Build

      By Duncan · Posted

      OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
×
×
  • Create New...