Jump to content
SAU Community

Recommended Posts

Look in the trading post?

I got mine from there.

You'll need to teach them not to bite you as well.

Put a bell around their neck or you'll have heaps of trouble finding them if it manages to run away.

Like carlo said, get them de-sexed and the stink gland removed. I think the females don't smell as much though.

They are pretty cool and are funny to watch sliding around on tiled floor.

Link to comment
https://www.sau.com.au/forums/topic/54552-ferret/#findComment-1067547
Share on other sites

haha ok thanks guys, i've looked around, kellyville pets are going to have some in stock around nov dec period around $60-$100, they actually told me there not in season?!?!

the girl on the phone must have been talking about fruit or some thing.

Comon guys whos up for a GROUP BUY ferrets haha i will get prices if i see some hands in the air.

btw this stink gland, does it really stink that bad?

-B

Link to comment
https://www.sau.com.au/forums/topic/54552-ferret/#findComment-1067563
Share on other sites

btw this stink gland, does it really stink that bad?

-B

OMG YES!

Even removing the stink gland doesnt get rid of it completly.. and its the males that are the worst, if I remember correctly. Had one for a few months, then my sister lost it :rofl::P!! never let her look after anything again!

Have a Ferret cage you can have if you end up getting one, got it from kelly ville pet stores for $200.. but have no need for it now.. so if you need it let me know

its a good idea, to get it from a real;y young age, that way it gets used to you and being around people in general. If you get them at an older age, they tend to be hard to control and dont like being around people.

Link to comment
https://www.sau.com.au/forums/topic/54552-ferret/#findComment-1067625
Share on other sites

Allright cool!

Will check out my storage some time this week.. I have to go in and make a payment soon so ill check then..

you have to wait till its a few months old before you can get it desexed I think, and make sure you get all the vacsinations (sp?) done if the breeder doesnt do it themselves.

dont have any pics handy of the cage, but its 3 level white wire cage, with a removalble bottom section for easy cleaning..

Link to comment
https://www.sau.com.au/forums/topic/54552-ferret/#findComment-1068093
Share on other sites

thanks man, well if you find it or not let me know and drop me a pm. you will find my account always logged on because i'll either have my computer at work logged in or computer at home on and logged in.

I just got hold of a breeder who will sell me a baby male for around 50 bucks.

awesome, can you PM me details?

I might get a pair again now I have more time. :bananaman

Link to comment
https://www.sau.com.au/forums/topic/54552-ferret/#findComment-1068297
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I'm looking for some real world experiences/feed back from anyone who has personally ran a EFR7670 with a 1.05 exhaust housing or a .83 I'm leaning towards the .83 because its a street car used mostly for spirited driving in the canyons roads. I"m not looking for big numbers on paper. I want a responsive powerband that will be very linear to 8000 rpm. I dont mind if power remains somewhat flat but dont want power to drop off on top. The turbo I've purchased is a 1.05, although the mounting flange T3 vs T4 and internal vs external waste gates are different on both housings, I not concern about swapping parts or making fabrication mods to get what I want. Based on some of the research I've done with chat gpt, the 1.05 housing seems to be the way to go with slightly more lag and future proofing for more mods but recommends .83 for best response/street car setup. AI doesn't have the same emotions as real people driving a GTR so I think you guys will be able to give me better feed back 😀   
    • Surely somebody has one in VIC. Have you asked at any shops?  Is this the yearly inspection or did you get a canary?
    • This is where I share pain with you, @Duncan. The move to change so many cooling system pieces to plastic is a killer! Plastic end tanks and a few plastic hose flanges on my car's fail after so little time.  Curious about the need for a bigger rad, is that just for long sessions in the summer or because the car generally needs more cooling?
    • So, that is it! It is a pretty expensive process with the ATF costing 50-100 per 5 litres, and a mechanic will probably charge plenty because they don't want to do it. Still, considering how dirty my fluid was at 120,000klm I think it would be worth doing more like every 80,000 to keep the trans happy, they are very expensive to replace. The job is not that hard if you have the specialist tools so you can save a bit of money and do it yourself!
    • OK, onto filling. So I don't really have any pics, but will describe the process as best I can. The USDM workshop manual also covers it from TM-285 onwards. First, make sure the drain plug (17mm) is snug. Not too tight yet because it is coming off again. Note it does have a copper washer that you could replace or anneal (heat up with a blow torch) to seal nicely. Remove the fill plug, which has an inhex (I think it was 6mm but didn't check). Then, screw in the fill fitting, making sure it has a suitable o-ring (mine came without but I think it is meant to be supplied). It is important that you only screw it in hand tight. I didn't get a good pic of it, but the fill plug leads to a tube about 70mm long inside the transmission. This sets the factory level for fluid in the trans (above the join line for the pan!) and will take about 3l to fill. You then need to connect your fluid pump to the fitting via a hose, and pump in whatever amount of fluid you removed (maybe 3 litres, in my case 7 litres). If you put in more than 3l, it will spill out when you remove the fitting, so do quickly and with a drain pan underneath. Once you have pumped in the required amount of clean ATF, you start the engine and run it for 3 minutes to let the fluid circulate. Don't run it longer and if possible check the fluid temp is under 40oC (Ecutek shows Auto Trans Fluid temp now, or you could use an infrared temp gun on the bottom of the pan). The manual stresses the bit about fluid temperature because it expands when hot an might result in an underfil. So from here, the factory manual says to do the "spill and fill" again, and I did. That is, put an oil pan under the drain plug and undo it with a 17mm spanner, then watch your expensive fluid fall back out again, you should get about 3 litres.  Then, put the drain plug back in, pump 3 litres back in through the fill plug with the fitting and pump, disconnect the fill fitting and replace the fill plug, start the car and run for another 3 minutes (making sure the temp is still under 40oC). The manual then asks for a 3rd "spill and fill" just like above. I also did that and so had put 13l in by now.  This time they want you to keep the engine running and run the transmission through R and D (I hope the wheels are still off the ground!) for a while, and allow the trans temp to get to 40oC, then engine off. Finally, back under the car and undo the fill plug to let the overfill drain out; it will stop running when fluid is at the top of the levelling tube. According to the factory, that is job done! Post that, I reconnected the fill fitting and pumped in an extra 0.5l. AMS says 1.5l overfill is safe, but I started with less to see how it goes, I will add another 1.0 litres later if I'm still not happy with the hot shifts.
×
×
  • Create New...