Jump to content
SAU Community

Recommended Posts

hey, just curious to know if any other skyline owners got epa'd last night?

I drove down at around 1'sh to meet someone and saw enough police presence to know i shouldnt hang around. I had one cop take down my plates outside Jam Factory. But nothing else. Then i saw cops standing outside KFC directing traffic.....but still nothing. I thought i was free til i got to Coles where i got directed to a "random breath test" station. And who else do i see? My good old buddies at the EPA.

Needless to say, i didnt pass exhaust sound levels (no duh there). I was recorded at 109db at 5000rpm (and i thought it was only supposed to be at 3300). Also was my AVC-R which wasnt actually connected in the engine bay. I had to argue with the cop and the EPA officer about whether or not boost was adjustable withing the cabin. But it was a lost cause! I find out in a week or two whether i cop that $500 fine, but seeing as this was how i bought the car one month ago, i should be fine.

So c'mon all.....who got caught??? hehe

Link to comment
https://www.sau.com.au/forums/topic/54881-epa-anyone/
Share on other sites

i got stopped by traffic on the other side of the road to where kfc is.. tried not to make eye contact with any togs but 1 came over and started to touch my rear tyres and just as he was heading to my drivers window the car infront took off so i followed.. was close tho.. this was early too around 10ish i think

but around 2ish i was dropping a mate home and was driving 5k's under the limit when i saw the highway patrol car sitting on the side of the road with a radar.. thinking to myself im ok i was 5k under the limit but as soon as i go by the headlights turn on and out it comes.. ended up getting a canary for too low, 4tyres and wheel alignment

Link to comment
https://www.sau.com.au/forums/topic/54881-epa-anyone/#findComment-1072482
Share on other sites

LastTemptation: yeah i remember you.....did you see me arguing with the cop over the avcr? haha yeah i knew i was gonna get it for the noise level! i was 90db on idle.

foznice: they do it from about 1m away and the legal limit is 90db. Sometimes they stick this CO2 sensor in to measure emissions...lucky for me they didnt, otherwise there would be more things i would have to change!

Link to comment
https://www.sau.com.au/forums/topic/54881-epa-anyone/#findComment-1072750
Share on other sites

Is there anyway of modifying your car and ensuring that the exhaust and emmissions are all legal or is just accepted that if you mod your car you will be out and you wear that risk knowing you might get EPAown3d?

- J.

quite easy mate

most people who get defected have exhausts greater than 3" in diameter with no cats and no resonators. And it was probably a jap-exhaust with stuffed baffling in the muffler also... this equals LOUD

i got a custom 3" exhaust made with brand new cannon muffler and a resonator and its very quiet i'm sure would pass epa.

as for other EPA-related items, well don't get an aftermarket blow-off valve (no need anyway) and don't get a pod filter unless you want hassles.

good luck,

Waz.

Link to comment
https://www.sau.com.au/forums/topic/54881-epa-anyone/#findComment-1075830
Share on other sites

the cops will get you no matter what, its what they belive not what you have, best bet is to stay away from the city and try not to drive it on fri/sat nights and pub hols, and after some bad press on skylines, ie some dimwit dragging and crashing on the princess

Link to comment
https://www.sau.com.au/forums/topic/54881-epa-anyone/#findComment-1075831
Share on other sites

the cops will get you no matter what, its what they belive not what you have, best bet is to stay away from the city and try not to drive it on fri/sat nights and pub hols, and after some bad press on skylines, ie some dimwit dragging and crashing on the princess

So basically you're saying if you own a Skyline, you WILL be bent over and you WILL be ****ed by the coppers?

- J.

Link to comment
https://www.sau.com.au/forums/topic/54881-epa-anyone/#findComment-1075862
Share on other sites

i got EPA'd on Williamstown beach last sunday. Poor ****s, there was another 3 skylines next to me, and a dozen other jap cars. I argued with the cop, asking him if its some kinda skyline chase on tonite, the **** just started coming up with some cheap excuses.

ANYONE ELSE GOT BOOKED THAT DAY?

Link to comment
https://www.sau.com.au/forums/topic/54881-epa-anyone/#findComment-1079111
Share on other sites

ratedGTR: was that at nite? cos i went driving thru there with as well as an s15, supra, and a 2 door sti. i was about to turn right onto that beach part but i saw it was fully lit up. i was like "stuff that" and turned left....but no cop came after us. i wasnt worried cos i cant get done twice for the same thing....but the others could (except the s15 - stock).

Link to comment
https://www.sau.com.au/forums/topic/54881-epa-anyone/#findComment-1079269
Share on other sites

ratedGTR i was the silver r33 next to you on sunday at williamstown. I got done also for exhaust, boost controller and bov.

My exhaust on idle was 90db (lol) and at 4800rpm was 101.4(lol). I dont understand how it can get that high.

Ive got a 3'' cat back with resonator and xforce muffler any ideas to quieten it?

cheers

ak

Link to comment
https://www.sau.com.au/forums/topic/54881-epa-anyone/#findComment-1079866
Share on other sites

ah yehh, i rememba you, the silver 33 with Veilside kit, sick ride u got there.

my one the bastardss didnt even check the exhaust, they just popped the hood, saw my package, and wrote me a novel.

gotta take it to EPA centre soon.

to quiten the exhaust, for about 100-150$, go to a Exhaust place. They will fix you up. they take it off and put some smaller pipe on etc. not sure wat else they do. but that will make ur db under 90. and once u pass EPA take it back to them and they will remove it for ya, and give you the parts for next time i u get booked.

cheers.

ratedGTR

Link to comment
https://www.sau.com.au/forums/topic/54881-epa-anyone/#findComment-1079899
Share on other sites

bigger turbo maybe? I have to get a stock cat back exhaust for the r32 gtr and work from there to quieten it. Also removing the power fc and replacing it with a standard ecu just incase they decide to test the emissions at macleod. did any of you get the $500 fine?

Link to comment
https://www.sau.com.au/forums/topic/54881-epa-anyone/#findComment-1079900
Share on other sites

yeah you better get rid of that turbo, especially if its top mounted, if not....u might be lucky and get away with it. You have 3 trials, if u fail first time, you can book another appointment, in a way its allright, coz then you know if they gonna say somthing about that bigger turbo, saves you time and effort ripping it out.

Im just gonna do somthing about my exhaust, and bov, other shit ill try to hide. see how i go. if i get cought, then ill rip everything out on my second try.

Link to comment
https://www.sau.com.au/forums/topic/54881-epa-anyone/#findComment-1080012
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I was using the wiring diagram I have So 12.74V is coming into the rear Fuel Pump relay as I measured.  When I turn the key to ON im getting 0.6V to the Fuel Pump plug; which i assume is backfeed voltage and doesnt include the 12V from ignition power.  The rear relay is working and being triggered.  From the diagram I clearly see the rear relay 80 = Rear Relay going into the Body/H loom (R-27) 27 = Fuel Pump plug going into the Body/H loom (T-20) 40 = Short Connector (R-27) I'm reading 12.74V on the blue/black wire which is the power for the Fuel Pump   From this diagram I can see the Ignition relay goes into the front and up to the ignition  2 = Fuel Pump Relay <1M> (R-27) 37 = ING Relay <1M> I started from the pump using this reference Which the way I read it (referencing Nissan wiring color codes) is: Pin Wire Color Function 1 B/P (Black/Pink) Ground 2 L/W (Blue/White)        ECU Trigger 3 SB (Sky Blue) Fuel Pump 5 L/B (Blue/Black) 12V Constant Tested SB to SB on Fuel Pump for continuity - confirmed Tested negative on Fuel Pump to 12V battery and L/B - confirmed 12V Pulled the relay putting 12V between Pin 1 & 2 and testing continuity on Pin 3 & 4 - confirmed relay   So that has me looking at this part of the circuit to understand whats happening here...and im still confused. From best I can tell; the disconnect is back to my previous diagram; between Ignition Relay and Fuel Pump Relay...which yet again; afaik is where the immobiliser should.    Thats what I was trying to explain to GTSboy; im not trying to fix it myself; yet I seem to have to get a Masters in Electrical Engineering (while im busy doing my actual job of DevOps & Cloud Engineering) somehow.  I just wanted more expert opinions; or more so that what I tested is correct and proves it to something around that area; to go back to the alarm tech (for a 3rd time) that he needs to fix it. He keeps telling me its not the alarm. He lives on the complete other side of the city so i understand not wanting to make a trip but as I said before if its the alarm it should be up to him to fix it. But he's adament its not; even though I pointed out the FP was immobilised through the original alarm. To my mind; it seems that the ECU is sending the signal; but the ignition is not getting 12V down the line.       
    • Maybe also really stiffly sprung track cars. Get the inside wheel up in a corner and all the fun stops. Also me sometimes (rarely) when I have to stand on the brake to convince the diff to drive the wheel that is still on the ground when I'm trying to diagonally get over severe driveway entrance, etc.
    • I feel like I'm missing something. You had an authorised installer come out and install a new alarm. Post install the car doesn't start, and you aren't getting the installer back to fix what they did wrong?
    • So either way it is gearbox out and look what is wrong?  I know about the input shaft bearing. Even before swap/new clutch the it sounded exactly like this: So is that inout shaft bearing or the other was installed backwards?  And can some please tell me the part number for that input shaft bearing? The gearbox is small box from R34 N/A and number is FS5W71C. Thank you  
    • I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
×
×
  • Create New...