Jump to content
SAU Community

Recommended Posts

To be honest, -and don't be offended for being blunt- the other stuff that flies around is no different to me than what you claim.

For the record, the specs you've listed are very similar to mine. I have stock cams, 2530s, Nismo AFMs and a Bosch 044 with sard 700ccs. Only way I could claim 400rwkw was with race fuel, extra timing and boost peaking at 25-26 psi.

Do people realize that most of the disagreements on this board are related to a dyno figure...?  

At the end of it all, how many GTRs are there that have done ~125mph...? The answer would be, quite a lot and I'm sure most would claim somewhat different horsepower.

F...k sack i have never said ha look at me im so great all i have done is posted the dyno sheet the car ran on the day and the whole reason with differences in hp is why i post the mph and yes i know there is plenty of much more powerfull gtr out i never said this was an awesome one or any this just posted it for imfo for others no other reason but if all i get is this shit f...k it blow it out your arse .I'm happy doing my thing was just trying to help other .maybe i should learn to keep it to myself would this better suit Emre ;)

  • Replies 46
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

look mate to say im running similar and we couldn't get it ,it must be bullshit ,it wot shit me ,maybe next time ask wot i think might be different as i might have some useful tips as this is not std injector thread ,i am willing to share but not if i keeping copping that shit ,and comparison to other threads at the moment.

look mate to say im running similar and we couldn't get it ,it must be bullshit ,it wot shit me ,maybe next time ask wot i think might be different as i might have some useful tips as this is not std injector thread ,i am willing to share but not if i keeping copping that shit ,and comparison to other threads at the moment.

I think you took the wrong end of emres stick mate :P

Even tho most threads get out of hand when it come to dyno reading, i dont think emre was having a go at you.

To be honest, -and don't be offended for being blunt- the other stuff that flies around is no different to me than what you claim.

For the record, the specs you've listed are very similar to mine. I have stock cams, 2530s, Nismo AFMs and a Bosch 044 with sard 700ccs. Only way I could claim 400rwkw was with race fuel, extra timing and boost peaking at 25-26 psi.

Do people realize that most of the disagreements on this board are related to a dyno figure...?  

At the end of it all, how many GTRs are there that have done ~125mph...? The answer would be, quite a lot and I'm sure most would claim somewhat different horsepower.

emre if you said you had been follow my car development you would have seen on std cams mine made 424hyperdrive379adreline hp at the wheels less than yours the cams made me more than a 100hp when tuned so there the difference straight up no magic no BS you want more buy some nice cams and tune them properly and i have seen a car with 2530 atr 25 psi and big cams go 550hp infront of me on stock internals (better than mine)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeah I've had too many issues with knock off's on the BMW's. I don't want to do a job twice or more because the parts are shit.
    • I read this and thought "ah! I will do this scissor jack on the tow point thing!" I just use my floor/low profile/costco jack and lift the car up by the tow hook itself, then slide jack stands under. Never thought about using scissor into floor jack combo :p
    • Well, my new WMI system took much longer to finalize. I actually missed my dyno appointment last Friday and lost my 150$ deposit. I'll be going back in the next week or two.  To sum it up. I only kept the AEM tank from my old setup. I replaced the AEM pump with a higher flow/pressure ProMeth 30GPH pump. I also swapped over to a 6AN low pressure feed line to the pump from the tank. There's also a pressure switch you cannot see on the pump high pressure line.    This is feeding 6x 200CC direct port nozzles and 1x 500CC Pre Throttle body nozzle. All fittings are Swagelok, because well why not. I also have a 300PSI pressure sensor up front.    I now have my Haltech ECU controlling everything. I start my pump with a basic relay at 5PSI and deadhead it. I then PWM a 3000CC methanol Injector to control flow starting around 10psi. The pressure switch in the trunk, along with my tank level are safeties before I ever get to 10PSI, and then I use my pressure sensor upfront as a secondary safety to cut the WMI and corrections in case the injector blocks or a line ruptures.  Wish me luck on the dyno!    
    • So, I'm back with bad news. There's no jack long enough on this planet that will reach the front subframe. If by some chance there is, it would weigh 200lb's.  I purchased a long reach jack... The damn thing weighted 120lb's and was massive. Didn't even come close, was still short at least a foot. It was a pain, but I brought it back. Next I decided HA! No problem, I'll get an Extra long reach jack. Well, I couldn't lift the box... It must have weighed 160LB's and luckily there was an open box in store. I took measurement and was still nowhere close.  Sadly I've lost hope and have accepted defeat. 
    • Thanks for that tip, niZmO_Man. I think the battery is OK. It's quite a new one, but I'll check. Last time I needed a new battery, everything electronic was fine, except that there wasn't enough current to turn over the starter. I decided to order one of the partial AV system translation CDs from Car Audio Workshop in NZ. That might have some effect, or help me diagnose the date problem. 🤞
×
×
  • Create New...