Jump to content
SAU Community

Recommended Posts

Guest INASNT

When i got my car serviced, oil, fuel, air filters, oil. plugs regapped to 0.8mm, also got a 2 stage turbosmart boost controller put in.

I have stock, IC, injectors and comp at the moment.

I wanted the boost set at 9 psi low and 14psi high, but i could only put the high setting on 12 psi because it was pinging.

I will be getting a S-AFC soon, so i wanted to know if when i get the S-AFC and get it tuned could i run 14 psi on high boost or whould it still ping coz of the stock IC??

Also whats the setting on their to stop the car stalling coz i got a Blitz Atmo BOV which is a pain in the arse to drive with in heavy traffic.

Also i got 150kw@wheels with 12 psi boost, pod filter and 3inch full exhaust, what can i expect to get with the s-afc tuned?

Link to comment
https://www.sau.com.au/forums/topic/574-s-afc-tuning-question/
Share on other sites

Okay...I'm no mechanic, but there seems to be alot of this at the moment. My guess would be the cold weather coming in, as boost tends to rise a little with cold air. And if you right on 12psi it wouldn't take much to exceed the computers restrictor.

A boost controler would usually be placed inbetween the intake and the wastegate actuator...I mean the line which runs to the boost solnoid which gives the boost signal to the computer (?)... I know mine cough and got upset until I removed the line....it seemed to boost heaps better and went to 13 instead of 12 and coughing.

Again...Don't take this as word of law.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • But seriously, can we ask for the results of the "tip a bottle of metho into a nearly empty tank" experiment?
    • Hang on. Let me get this straight. The desire is to have coilovers, BC in particular, to be MORE comfortable on Sydney roads than stock suspension? Well, that's obviously not right. BCs have crude damping design at the very best, and typically hard spring rates. BC stands for Billy Cart. And then, the desire is to put in some shitty old worn out stockers, to get it blue slipped and then put the BCs back in? And then.....what? Not worry about getting pulled up by the Plod? Because you seem to have raised a worry about paying for engineering (which actually does solve all your legality problems) and still getting pulled up.... but the only problem there is that if/when that happens you have to show your paperwork at the inspection station. Whereas, if you just swap in borrowed shitty old stockers to get it slipped now, and then you get defected in the future, you have to go find more shitty old stockers then too. You course of action looks like this set of options: Buy brand new stock type dampers, and springs. probably cost a bit more than $1k all up, but will last for the remaining life of the car. Put them in, pass inspection, drive on them forever more. Hell, they could even be really nice Bilsteins and Kings or other lower&stiffer springs if you wanted. Get the car engineered as is. ~$1k. Buy new Shockworks coilvers (or MCA) and also pay for engineering. You're spending a lot more here. But these will be the best things that you could drive around on.
    • Might be worthwhile hitting up Facebook's groups, I know most of them contain terrible people and scammers - however you might be able to find someone that's in Sydney with factory suspension you could purchase and/or hire. Just do not send any form of money anywhere, in person cash only.
    • Thanks @Duncan Ride height is fine. I think it's almost stock tbh. Happy to share a pic. I don't actually have a regular mechanic as haven't lived in Sydney too long. Could you or anyone recommend any shops in Sydney?
×
×
  • Create New...