Jump to content
SAU Community

Prince/Skyline & Misc Car Museum


Recommended Posts

Hi just want to know the museums in Japan worth visiting

Can anyone list the museums/places if possible their addresses as well

I saw a website Prince & Skyline Museum but not sure if address is complete

Inside of the Okaya-shi, Nagano torii common or a まびこ park

cos I dont wanna go to museums and then when im there its close as someone told me & ive read somewhere that sometimes the museums closes not sure the reason.

Thanks

Rob

Link to comment
https://www.sau.com.au/forums/topic/57708-princeskyline-misc-car-museum/
Share on other sites

red park is closed as IG said. The other Skyline Museum, the Prince and Skyline musuem in Nagano, is still open. How you get there depends on which direction you're coming from. From the Tokyo area, take the Chuo expressway north, through Yamanashi as far as the Okaya Junction. Branch off, heading north towards Nigata and get off the expressway at the Okaya Interchange. The museum is a short (5 mins) drive from the exit. (on leaving the toll booths, take the first left. Next set of lights, turn right, drive up the hill, and it's on the left IIRC)

Their website is here

The "museum circuit" around Mt Fuji is worth a go - Kawaguchiko motor museum (general japanese cars going waaaaaaay back up to the present), Takamura Museum (a lot of american, boo, upstairs some rollers, ferraris etc), Gallery Arbath (Italian goodies, ferraris, alfas, lancias), Racing Palace (All racing cars including prince and nissan skylines through the years, f1 cars, jgtc cars, rally cars, all sorts of stuff really, well worth a vist), Gotemba sports car garden (predominantly ferraris). You do need to hire a car (quite cheap through tocco) and it's a nice spot to visit with great roads and some fun and games at night. In tokyo the toyota historic garage/museum is good and central to other stuff you'll likely be visiting in daiba. Honda have a good museum up at twin ring but that can be a bit of a pita to visit, you can "hire" a teg type r for a few laps though. Don't forget the nissan galleries in ginza as well, often they have some interesting exhibitions (sometimes they're pretty dull as well ;) )

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Initially I thought having a pair of Recaro seats would be a big bonus, it turns out these do get a little uncomfortable on long journeys (my fault, not the seat). I had a look through the GSM Performance website at reclining seats and booked an appointment to visit their show room. I got the Recaro Sportster CS for the R34 from here, was very happy with the service received so of course a re-visit was in order. Unfortunately the two Corbeau seats I had chosen aren't on display but they had 4 other options available. Two seats dug into my back, one dug into my legs and the other was perfect. I also found out that Recaro seats use a larger bolt pattern so some adaption was required. Luckily GSM offer some universal adaptors that should solve this problem. I searched the interwebs for price comparisons and Corbeau themselves were the cheapest at £300 cheaper (for the pair). I asked GSM if they could price match, unfortunately they couldn't. I later received an email saying Corbeau would honour them the same discount, but the purchase was already made. I did however order the brackets from GSM, both arrived on the same day. I started with the passenger side seat, knowing this was going to be a little trial and error. There are 3 mounting holes at the front and 2 at the rear on these JURAN Racing seat rails.  With the adaptor brackets mounted, the allen cap bolts started to push into the seat, NOT GOOD!  The rear mounting holes lined up but there were issues at the front. The holes were 1/2 hole out, so the brackets got a tickle with the drill to modify the holes. The supplied bolts weren't going to be long enough and a spacer was needed to stop the adaptor bars from bending. A local fasteners company supplied be with some nylon spacers and longer bolts (M8x30, although these will be replaced with 35mm long shortly) A before and after I pre-drilled the front bracket before making a start on the driver's seat to save some time. And in no time at all that was in the car too. The all black seats have transformed the interior and these are MUCH more comfortable. The only downside with the new Corbeau seats is I sit a little higher, but I'll happily accept that over discomfort. The Youtube video can be found here: https://www.youtube.com/watch?v=wPyttKPktXA
    • All 3 I guess. The car came with the JASI Aero 4 door Type R Full Kit unpainted so this was one thing at the top of my list to complete then I noticed there were body panels parts for this kit so i picked them up along with some black mesh to fill in the front bumper and front side air vents. car is at a paint and body shop atm completing this work. Next I will be addressing the internal bells and whistles, great summer project I can do with the kids.  full interior removal - ,boys car sound deadening - pads and spray ,boys stereo, sound, lighting - Big 3, GTT or bigger alternator ,kids head lining - dye black add star lighting mod ,daughter. That's it for the next 5-6 months. I have some motor maintenance  work i have to plan out. oil filter relocation, gaskets, mounts. beyond that, mind is starting to turn over if i can use a DET intake plenum, block off turbo ports & pipe in a air intake.      
    • roller coaster of a ride. Alarm system was removed & main harness was repaired where possible. still no fix just random successful starts. moved on to the replacing the ignition switch and relay. well all this troubleshooting & repair has been going on, the car is at a paint and body shop being pushed around. Ive been going down there on odd days after work to get it sorted.     
    • 5th November if you want to come out for a spin wakfield
    • PROBLEM WAS BROKEN COOLANT SENSOR!!! Replaced with a new one and its running mint.
×
×
  • Create New...