Jump to content
SAU Community

ER34 restrictor - from boost hose

NismoR34

By NismoR34,
in Wanted to Buy

 Share

Recommended Posts

NismoR34 Grand Master

NismoR34

Posted
Posted

Hi all.

I am after a very small metal part - one of the restrictors from the hose that runs from the top of the turbo to the factory boost solenoid. I will try and take a pic [macro] on the weekend in case you don't know what I am talking about!

There are 2 of these restrictors on a stock boost arrangement [er34].

If you have a bleed valve or EBC chances are you have a spare restrictor :)

Not sure if r34 GTR or 33 [any] are the same but if they are then that will do too!

Cheers

Dale

Link to comment
https://www.sau.com.au/forums/topic/58271-er34-restrictor-from-boost-hose/
Share on other sites
  • 2 weeks later...
NismoR34 Grand Master

NismoR34

Posted
  • Author
Posted

I am missing one [out of 2] and to run stock boost I need a 2nd one.

As far as I know GTR's only have one but the RWD turbo skylines have 2!

Let me know if you no longer need it and I will buy it off ya :thumbsup:

Cheers

Dale

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • 25RBGT
      Got this r31 silhouette flood car to rebuild.

      By 25RBGT · Posted

      Been a long time since r31 got some love, my brother dropped a shitbox ls1 crapadore in my lap to fix up.  Put a wiper motor in as the flooded one was no longer alive.  got windscreen wipers now. Time to clean respray and install back in the titanic  IMG_0505.mov
    • PranK
      Returning after a long time!

      By PranK · Posted

      Nah its a server spammer thing  Although, now that I manually approve all the accounts I can probably loosen up some of the restrictions.  
    • CEF33Y
      Report that engine failure

      By CEF33Y · Posted

      Thread bump, again! Although, no bad news this time. Posting for the sake of possible root cause. Basically, I rebuilt it (mostly stock), installed Haltech + sensors, had it running fine on new ECU.  Still not really understanding why it cracked pistons last time. Got to tuners, and while checking timing, noticed +-10deg of timing scatter while revving. Changed CAS, and it was rock solid. While not definitive, can't imagine seeing 20+ psi with that amount of scatter would be a good thing. Also glad I found something.   Bit more of a run down; Carried out a stock rebuild, a set of stock pistons, out of a spare bottom end. Everything stock apart from head studs and oil restrictors. (so I can pretend I didn't let the Nissan out, ha.) Armed with the measuring gear and FSM, set about doing overhaul. Oil restrictors as per oil control thread for a RB25, stock oil pump, drifting. Head drain/vent from rear of head, to passenger side of sump above oil level. Two dash 10 vent lines from drivers side of sump (unused atm) Hi octane style cam cover breather kit Splash covers over last 2 cam caps. Both breather lines from cam covers to vented to atmosphere catch can, not plumbed back into sump (wanted to see what it was actually breathing). Got it run in (did about a 1000km) no to low boost scenario, As I had questions over old ECU setup. Installed haltech +sensors for flex Retune on E85 (finding CAS Issue along the way), made 300rwkw at 20psi, out of wastegate. Did a drift day the next day (yes, it was a big weekend!) and was checking catch can throughout the day, ZERO blowby. I mean nothing. Lines from cam covers are not even wet. Done a bunch of street driving, spirited and catch can is still dry. Early days I guess, but pretty happy so far. Also now run 10w60, up from the 10w40 that I used to run. Oil pressure is significantly better, especially when hot (as you would expect)      
    • GTSBoy
      Returning after a long time!

      By GTSBoy · Posted

      Done
    • Shizu
      Returning after a long time!

      By Shizu · Posted

      Thanks buddy. I thought it was a server storage thing. 🤣
×
×
  • Create New...