Jump to content
SAU Community

Recommended Posts

hi i have an R32 Rb20det

after warming up 4 sum 5-10mins and take off for the first 5mins of driving the idle will drop off when at traffic lights, will manually have to keep revs up but after 5 minutes of driving she sumhow fixes its self any idea pls cause i am lost :bs!:

mods r forgeys,2.2l engine balanced all that shit, FMIC,Pod filtr,S-AFC

dunno if that helps to give advice?

Link to comment
https://www.sau.com.au/forums/topic/58544-cold-idle-drop-off/
Share on other sites

Hey,

I had this porb when i first got my car.

It may be your cold idle sensor is closed constantly.

Because what normally happens is when the car is cold the sensor opens up and makes the car think the throttle is open a little bit. Thats why you'll usually idle at 1,400 rpm or there abouts.

Yet yours may be constantly closed which would explain why its fine when it warms up.

You can get a new idle sensor for like $50 i know a guy if you need help.

Hope you can understand my poor technology explanation :P

Hey,  

I had this porb when i first got my car.

It may be your cold idle sensor is closed constantly.

Because what normally happens is when the car is cold the sensor opens up and makes the car think the throttle is open a little bit. Thats why you'll usually idle at 1,400 rpm or there abouts.

Yet yours may be constantly closed which would explain why its fine when it warms up.

You can get a new idle sensor for like $50 i know a guy if you need help.

Hope you can understand my poor technology explanation  :P

Hi Sherrif;

Do you think the reverse may be true if warm idle at start up is really lazy? When started warm my 32 GTR fires and runs but revs are slow to build from about 550 - 950. Idles OK once they're at 950 though. Doesn't happen when cold.

Cleaned ACC valve but no joy, any ideas?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...