Jump to content
SAU Community

Recommended Posts

just wanting to get some feedback on your first impressions of your stageas.

I have been thinking about getting one for a while and finally took one for a testdrive, and it wasnt quite what I expected. It was a 1997 RSFour with about 48000kms on the clock and in very good condition.

The first thing that put me off was the airy-fairy steering, something reminescent of my old u12 SSS bluebird, and the booming sounds coming from the rear from road noise. I know it is a station wagon/ family wagon but I expected a bit more 'feeling' from the steering and a little less noise as it is a bit more upmarket and sportier than the average station wagon, it didnt feel as solid as one would expect from a 1600/1700 kg car. I also realise that the car is heavy but expected some sort of 'turbo' performance when it reached about 3000-4000 rpms when the turbo reaches boost.

Is the normal acceleration very linear without any noticeable increase in the rate of acceleration (seat of pants feeling) - when it is making boost?

My expectations is based on the experience of my R32 gts4 which I've had for about 5 years which is pretty much still stock and whilst it is not quick by todays standards it does have that 'turbo' rush. The steering is very positive and it feels solid when you are driving. I like my cars to be very close to what I want from a car without having to redesign suspension systems etc, I dont mind doing bushes/shocks etc

To me it seems like it would take a lot of changes just to get the car feeling right. Maybe I am expecting 260RS performance from a RSfour I dont know.

To any 260 RS owners, is the steering and suspension sporty feeling or at least ahead of other station wagons you've driven and somewhere on the road to sedan performance?

Good points - car has lots of features over other cars.

car looks good, has skyline bits which I assume would translate to Skyline reliability.

is this a average stagea or did I just testdrive a 'bad' one?

Stephen

Link to comment
https://www.sau.com.au/forums/topic/59925-stagea-testdrive-impressions-please/
Share on other sites

Changing from the 225/16/R50 tyres to 235/40/R18 made a big difference in the handling of the car for me - I will have the anti-sway bars changed in a week or so. The car felt VERY soft and floating when I first got it and i am not convinced the shocks don't need upgrading, however after a couple of weeks of driving the car i am getting used to the soft ride...

I don't find the car noisy at all - my previous car was much noisier from tyre/road noise, so I find the Stagea very pleasent to drive. For the fist couple of weeks I didn't have much audio in the car to talk of so I did a lot of driving with the windows down and no stereo going and found the car quite quiet...

I don't feel like I am driving a wagon that much - well not in a straight line any way :). Going around corners is a bit freaky with the standard sway bars though... Compared to a Magna station wagon the Stagea is an outright sports car IMHO. Even though the Stagea is a largish car I don't feel as if I am driving a large car (except when going around corners and carrying a load in the back :D)

As for the turbo - this is the first turbo I have owned, so I can't compare it to much at all. However the car doesn't give you that intitial feeling of gut wrenching power when you press the metal - the car seems to run fairly effortlessly and smoothly through the changes. I find the car plenty powerful and swift enough - but depends what you want - I prefer a car that is smooth and fairly quiet and can live without wheel spin and other outward signs of 'bruteness'.

Overall with some relatively minor changes in the ride the car is much improved so I wouldn't be too put off by the spongey ride the 'stock' car gives - afterall in the wagon category and in the price range there really is very little choice, probably no real choice at all.

Hi gts4diehard, your comments are pretty similar to my experiences.

I also find the steering a little vague (have a read in the Stagea Suspension thread), the Whiteline stabiliser bars helped a lot. They stopped the exagerated roll and made the chassis respond quicker, but it really needs more caster on the front to give it some turn in. A set of Whiteline adjustable front radius road bushes are waiting (already on the garage shelf) to go in. I do like the long wheelbase stability and compliant ride, so I am upgrading to Bilstein shocks but keeping the standard springs, I will use the lower spring seat circlip grooves to get the height to where I want it.

I find ours looses a bit of the vague feel when it has some front drive, I need to have a bit of throttle on in the corners. Then it simply rockets away from the apex without any apparent effort, in the wet this is quite freaky. I have absolutely no doubt that after the stabiliser bars, caster (inc full wheel alignment) and Bilsteins, our Stagera will handle better than most cars and way better than any other waggons. After all it is really a GTR waggon, so the potential is there.

As for NVH, I really haven't noticed any "booming". Most people comment on how quiet it is inside for waggon. No, I haven't upgraded the stereo yet.

Engine performance is similar to the R33 GTST, being very linear. But hauling around another couple of hundred kilos and the 4wd losses takes the edge off it up to around 100 kph. Then you start to feel the turbo push, if you didn't drive it out in the open, then you would only feel the heavy weight. Stageas have 2 stage boost limits with very low boost in 1st and 2nd, so you don't get the turbo surge to help overcome the inertia. An inexpensive and mild boost upgrade, thus removing the lower limit, will help immensly. I am going to try the Jaycar electronic boost controller on our Stagea.

I don't like the look of the compliance cat fitted to our Stagea, it looks small and inefficient. It will be replaced along with the rest of the otherwise standard exhaust system. From the turbo back, it's all going.

As the others have already said, ours cost $16K and with another $4K spent on upgrades, I will have a 200 awkw waggon that will out perform and out handle most sedans and coupe's easily. For $20K there isn't another waggon that even comes close.:)

thanks for comments guys. The one I saw was $23000 up here in Brisbane and if it needed $4k spent on mods I would be inclined to buy an awd magna for the money. If I were able to get something all up for less than $20k with mods then that would sway the equation a little more in favour of Stagea again.

Stephen

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Did this end up working? Did you take some pictures?
    • And finally, the front lower mount. It was doubly weird. Firstly, the lower mount is held in with a bracket that has 3 bolts (it also acts as the steering lock stop), and then a nut on the shock lower mount itself. So, remove the 3x 14mm head bolts , then the 17mm nut that holds the shock in. From there, you can't actually remove the shock from the lower mount bolt (took me a while to work that out....) Sadly I don't have a pic of the other side, but the swaybar mounts to the same bolt that holds the shock in. You need to push that swaybar mount/bolt back so the shock can be pulled out past the lower control arm.  In this pic you can see the bolt partly pushed back, but it had to go further than that to release the shock. Once the shock is out, putting the new one in is "reverse of disassembly". Put the top of the shock through at least one hole and put a nut on loosely to hold it in place. Put the lower end in place and push the swaybar mount / shock bolt back in place, then loosely attach the other 2 top nuts. Bolt the bracket back in place with the 14mm head bolts and finally put the nut onto the lower bolt. Done....you have new suspension on your v37!
    • And now to the front.  No pics of the 3 nuts holding the front struts on, they are easy to spot. Undo 2 and leave the closest one on loosely. Underneath we have to deal with the wiring again, but this time its worse because the plug is behind the guard liner. You'll have to decide how much of the guard liner to remove, I undid the lower liner's top, inside and lower clips, but didn't pull it full off the guard. Same issue undoing the plug as at the rear, you need to firmly push the release clip from below while equally firmly gripping the plug body and pulling it out of  the socket. I used my fancy electrical disconnect pliers to get in there There is also one clip for the wiring, unlike at the rear I could not get behind it so just had to lever it up and out.....not in great condition to re-use in future.
    • Onto the rear lower shock mount. It's worth starting with a decent degrease to remove 10+ years of road grime, and perhaps also spray a penetrating oil on the shock lower nut. Don't forget to include the shock wiring and plug in the clean.... Deal with the wiring first; you need to release 2 clips where the wiring goes into the bracket (use long nose pliers behind the bracket to compress the clip so you can reuse it), and the rubber mount slides out, then release the plug.  I found it very hard to unplug, from underneath you can compress the tab with a screwdriver or similar, and gently but firmly pull the plug out of the socket (regular pliers may help but don't put too much pressure on the plastic. The lower mount is straightforward, 17mm nut and you can pull the shock out. As I wasn't putting a standard shock back in, I gave the car side wiring socket a generous gob of dialectric grease to keep crap out in the future. Putting the new shock in is straightforward, feed it into at least 1 of the bolt holes at the top and reach around to put a nut on it to hold it up. Then put on the other 2 top nuts loosely and put the shock onto the lower mounting bolt (you may need to lift the hub a little if the new shock is shorter). Tighten the lower nut and 3 upper nuts and you are done. In my case the BC Racing shocks came assembled for the fronts, but the rears needed to re-use the factory strut tops. For that you need spring compressors to take the pressure off the top nut (they are compressed enough when the spring can move between the top and bottom spring seats. Then a 17mm ring spanner to undo the nut while using an 8mm open spanner to stop the shaft turning (or, if you are really lucky you might get it off with a rattle gun).
    • You will now be able to lift the parcel shelf trim enough to get to the shock cover bolts; if you need to full remove the parcel shelf trim for some reason you also remove the escutcheons around the rear seat release and you will have to unplug the high stop light wiring from the boot. Next up is removal of the bracket; 6 nuts and a bolt Good news, you've finally got to the strut top! Remove the dust cover and the 3 shock mount nuts (perhaps leave 1 on lightly for now....) Same on the other side, but easier now you've done it all before
×
×
  • Create New...