Jump to content
SAU Community

Mega Squirt?

DETurbine

By DETurbine,
in Engines & Forced Induction

 Share

Recommended Posts

DETurbine Enthusiast

DETurbine

Posted
Posted

Was wondering if any of you guys have tried the Mega Squirt on there cars?

I am probably going to go this route with my RB25DET, but it is kinda sketchy on if you can run the ignition and spark, since it is a distributorless motor. My friend is thinking that there might be a way to do it, but not for sure. Also there is talk about new software that will allow this. For $250 (US currancy), it is totally worth it in my eyes.

Link to comment
https://www.sau.com.au/forums/topic/63381-mega-squirt/
Share on other sites
DETurbine Enthusiast

DETurbine

Posted
  • Author
Posted

No the Mega Squirt is pretty much a full stand alone, just like the power FC. You have the choice of buying the circuit board and making your own box or you can buy them pre made. It can adjust fuel, ignition (not for distributorless motors yet), knock, and has spaces for add-ins such as a two step, etc.... I have heard that there is going to be new software that will allow it to control distributorless motors. Also like a freind has told me, when you get to a certain power range your ecu will automaticly adjust it's timing. For $250, I think it is totally worth it. THere are a bunch of 12-11sec cars running this unit on their cars and love it.

Link to comment
https://www.sau.com.au/forums/topic/63381-mega-squirt/#findComment-1192585
Share on other sites
PHaT MR30 Grand Master

PHaT MR30

Posted
Posted

yeh was gonna put one of these on my old skyline, changed my mind though as it was too experimental with alot of If's and But's and Try this

your better to go something like PowerFC etc on such an engine, maybe if your building an older motor up be ok

Link to comment
https://www.sau.com.au/forums/topic/63381-mega-squirt/#findComment-1192872
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • GTSBoy
      new 1.5 LSD issues/concerns

      By GTSBoy · Posted

      A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • JC71
      new 1.5 LSD issues/concerns

      By JC71 · Posted

      the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
    • TurboTapin
      Most women will agree that parking is the most taxing part of driving

      By TurboTapin · Posted

      What a time to be alive!!
×
×
  • Create New...