Jump to content
SAU Community

Recommended Posts

hey guys

Well i've put alot of thought about it and decided i'll sell my car and upgrade to a 34gtr. at the moment just wondering to see if they are poeple actually interested in it, i'll post the mods done to it and i'll have some pics for it by the weekend

Nissan Skyline 1995 GTR V-Spec Mid Night Purple

Geniune 54000ks , A/C, P/W, P/S, C/L and normal gtr fetaures

RECRO leather seats (front L&R and rear)

HID light,clear indicators(front and side)

Duluck brace,nismo short shift kit,nismo gear knob

Alpine CDA 9835 CD/MP3/WMA head unit with Focal Splits

TEIN Suspension

All rotors been machined and fited with endless Brake Pads

18x9 Kakamoto racing wheels with Fedral tyres with 90% tread left

Engine mods as follows:

ARC intercooler & oil cooler

HKS 2540 turbos

K&N Pod Filters

HKS Intercooler Piping

HKS Fuel Regulator

HKS Spark Plugs

NISMO injectors

Split Fire Earth

Trust Type R BOV (handles 1 to 2 bar boost)

RSR 2.5" to 3" front pipe to Jasma 3.5" with high flow cat

Greedy EO1 boost controller, Apexi Power FC,Apexi Turbo Timer

Brass button Clutch

the engine it self has had a mild bottom end rebuild.

More infor will be posted soon, you are after more info please email, private message or call/sms me

thanks

Nick

0432733357

[email protected]

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I was 99% sure the standard one is long enough to get there, you might just have to change the throttle orientation. If not, I remember someone having used an r31 cable instead, but that is probably harder to find than r33 by now...
    • HELP   Hey all, Is there an accelerator cable from another Nissan that can be used on the R33 GTST RB25DET with a Greddy forward facing plenum?  Thanks in advance  Rob 
    • Or do we think it was installed to give 1 bar of boost max, all day, everyday?
    • So could it be assumed it has been installed intentionally with potentially a power FC boost controller kit? 
    • Had my rig on Matt's dyno at PITS the other day. After a few years between tunes I added a few sensors and swapped intercoolers. Result. 553hp at 26psi. Not bad for an FJ20 that was built in 2007. The problem.. It filled the overflow bottle on hard runs which leads me to believe the head gasket isn't sealing. I have a coolant pressure sensor which was reading cap pressure at 22psi and occasionally overrunning to 23/24 psi on deceleration after a pull. It was not spiking. It has arp2000 head studs and a cometic gasket. As its been 18 years in service, I pulled the engine out and head off. Everything looks good but we obviously have an issue. Where I'm at.. Years ago I had the same issue, I checked the stud tension and they were all over the place. Some at 60 to 70 and some up near 90. I nipped them all to 100ft lbs and this stopped the water push until now. I believe this compromised the gasket back then. What do I do? 2 options are..  1) I bought arp 625+s, which I could put in with a new gasket. Thinking Kameari this time, reassemble and try again. 2) strip the block, get fire rings machined in with copper gasket and try that. I do not want to push it more than 28 to 30psi. I think the turbo will be out by then anyway. (G30-770). My other concern is the long term ability of a copper head gasket. Are they streetable for years? I feel like a new gasket with the new studs will probably suffice, but I don't know. Any thoughts welcome and advice on copper gaskets and fire rings. Thanks!
×
×
  • Create New...