Jump to content
SAU Community

Tuners in Canberra

Silver_r33
 Share

Recommended Posts

geordie Proficient

geordie

Posted
Posted

Yeah like Jonny at Trojan...owns a TT soarer and hes pulled well over 300Kw out of it now, im pretty sure they know what there doing :P He been tweaking this thing for ages..... I remeber at one of the shogun dyno days he rocked up and got a heafty 280kw form standard turbos...hehehehe

Silver_r33 Contributor

Silver_r33

Posted
  • Author
Posted
Chasers come with the 1JZ GTE don't they? That's the same engine as the twin turbo soarers. I'd say a few of those have been worked on, so it really shouldn't be a problem to find someone competent enough to tune it.

They do come with a 1jz, but its a later version with VVTi and a single turbo, instead of the twins. Slightly different specs wise, and the version i have develops peak torque at 2400rpm, rather than 4000-odd. I've also been told the heads are slightly different too with no abnormalities on the ports where as the earlier versions have 2 ports (i think its exhaust on 2 and 5) that are slightly squashed. Enough differences for tuning them differently? I dont know...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • soviet_merlin
      WGNC34 - floor mats

      By soviet_merlin · Posted

      Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • joshuaho96
      Tomei gasket

      By joshuaho96 · Posted

      I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Marek
      Hi everyone.

      By Marek · Posted

      Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
×
×
  • Create New...