Jump to content
SAU Community

Recommended Posts

1997 GTR titanium silver with xenon lights. Awesome car. Awesome condition. (plate not included) Engine built 2003/2004 by Steff @ IMS tuned 6th Feb 2005 600HP@engine 1.6 bar. (max torque @ 4000 rpm) runs easy 11's Bullet proof car Street legal:

JE 88mm forged pistons Shot-peened rods HKS drag pro valve springs Balanced crank ARP rod bolts Ported and polished head (Steff @ IMS) HKS cam gears HKS cams HKS 1.2mm head gasket Nismo 600cc injectors Nismo fuel regulator Nismo oil pump Nismo fuel pump Bosch ecternal fuel pump Nismo rings Nismo bearings Nismo turbos (fitted 2005: latest technology turbos: massive low and high end torque) NGK iridum8 spark plugs Swell pot Bosch fuel pump Motec M48 (tuned by Stef @ IMS) HKS oilcooler Modified baffle sump Apexi GT-spec Drag intercooler Apexi dual N1 exhaust Stain (USA) super high-flow cat-converter Blitz 18x10 wheels: 265 Falkens Endless 2 piece rotors Endless pads Ohlins PCV fully adjustable coilovers Tein tension rods OS Giken triple plate clutch Lightened flywheel Greddy e-01 boost controller HKS torque split controller Ganador mirrors Larger core radiator ARC titanium gear knob Nismo 320 km/h dash Short shifter Apexi turbo timer Alarm/immobiliser with auto window/boot Defi fuel pressure and boost gauge Nismo triple gauges Tinted windows The hard work has been done and the big dollars spent. All parts under 2 years old. Turbos brand new. Tuned to perfection by Steff at IMS for longevity. Extremely fast street car both on tight corners and highway.

All work was done by Stef from IMS on the gold coast. He tuned John Tuelans GTP Cup GTR and was head machanic for one of the V8 supercar teams. Engine has done approx 19,000 kms since the its build running 1.5 bar max boost. Well below its rating of 2.0 bar.

Asking 64K.

I am happy to sell all the parts as a full package if replacement parts provided.

Michael

Link to comment
https://www.sau.com.au/forums/topic/69800-1997-gtr-r33-600hp-bargain/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...