Jump to content
SAU Community

Recommended Posts

am contemplating the tiltled setup for improved braking and front end grip without breaking the bank cause my rears dont last that long anyway. Is this a reciped for snappy or excessive oversteer? Will it be imbalanced or if driven with the setup in mind should be ok?

ideas apprec

PS 180sx RB20DET infrequent track work and understand front wet grip may be reduced

Link to comment
https://www.sau.com.au/forums/topic/70048-semi-slick-fronts-street-rears/
Share on other sites

Rears wearing too fast usually indicates poor suspension alignment and/or excessive rear spring rates and inappropriate damper rates. If you fix those problems and use better rear tyres, you won't loose as much traction and wear the tyres out so fast. Plus you will go faster of course.:rofl:

Rears wearing too fast usually indicates poor suspension alignment and/or excessive rear spring rates and inappropriate damper rates.  If you fix those problems and use better rear tyres, you won't loose as much traction and wear the tyres out so fast.  Plus you will go faster of course.:rofl:

Ahh, but you forget about skids and the like :P

I have driven with some really good street tyres on the front and really bad ones on the back which is nearly comparable.

It's pretty much as you would expect. You have no front end issues, barely even think about it because you are perpetually concerned about your rear end stepping out, as it does again and again.

You can only then drive as fast out of a corner as your rear tyres will allow; ie reduced speed due to wheelspin.

Under heavy brakes again the back end steps out but the situation is not as bad comparatively speaking.

High speed corners I found fairly intimidating. Not comfortable.

cheers guys interesting, my rears wearing is as much due to my occassional penchant for improving power slides turning into drifts :kick: and i guess that if I am really pushing and wearing my fronts it means I am going around corners far too quickly to be legal on the road.

Having said that I am interested in reducing rear wear so ideas apprec (cheers SK), have cusco coil overs all round. Maybe these combined with the odd 185 tyre i lob on is the problem!

And AB good point about high speed corner entry, good example is the right hander at the end of the straight at Wakefield - dam thing almost went sideways on a down change at 160km/hr, dont suppose the grip differential would improve that at all! maybe wider street rears

I wish my rear tyres would lose grip so I could learn some oversteer manouvers :) Even after 3 trackdays (~150+ laps), 30 drag runs and 40,000km on the road I still get no oversteer (the car is more likely to push than anything - on the track).

SK: I'm sure you have mentioned it somewhere but I have no idea which thread, what are correct spring/damper rates etc for a stockish (power) R33 GTS-t for circuit/drag work (50/50) which I know isn't ideal but hell im not out to crack a 10sec pass or 2mins around bathurst.

im talking about pure drift use. my rears have held up well so far. due to the camber on the rears, makes it easier to break traction as there isnt large contact patch, and also when the insides wear out, i get the tyres swapped over so the outsides are worn, the insides are brand new.

benm, what sort of tyres are you using?? my stockish 33 has no trouble lighting the rears, thats with 255/35 pirelli p7000s.

cheers

Linton

Michelin Preceda 225/50/16.

I was talking to a mate last saturday night and from memory he has 255's and says he has no issues frying those either (with a fair bit less power too).

Maybe my engine is forgetting to produce (nm) and only producing (kw) :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I saw you mention this earlier and it raised a red flag, but I couldn't believe it was real. Yes, the vacuum signal should vary. It is the one and only load signal from the engine to the ECU, and it MUST vary. It is either not connected or is badly f**ked up in some way.
    • @Haggerty you still haven't answered my question.  Many things you are saying do not make sense for someone who can tune, yet I would not expect someone who cannot tune to be playing with the things in the ECU that you are.  This process would be a lot quicker to figure out if we can remove user error from the equation. 
    • If as it's stalling, the fuel pressure rises, it's saying there's less vacuum in the intake manifold. This is pretty typical of an engine that is slowing down.   While typically is agree it sounds fuel related, it really sounds fuel/air mixture related. Since the whole system has been refurbished, including injectors, pump, etc, it's likely we've altered how well the system is delivering fuel. If someone before you has messed with the IACV because it needed fiddling with as the fuel system was dieing out, we need to readjust it back. Getting things back to factory spec everywhere, is what's going to help the entire system. So if it idles at 400rpm with no IACV, that needs raising. Getting factory air flow back to normal will help us get everything back in spec, and likely help chase down any other issues. Back on IACV, if the base idle (no IACV plugged in) is too far out, it's a lot harder for the ECU to control idle. The IACV duty cycle causes non linear variations in reality. When I've tuned the idle valves in the past, you need to keep it in a relatively narrow window on aftermarket ecus to stop them doing wild dances. It also means if your base idle is too low, the valve needs to open too much, and then the smallest % change ends up being a huge variation.
    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
×
×
  • Create New...