Jump to content
SAU Community

Recommended Posts

hi all its time to sell my baby its a 93 model R33 GTS-T maroon in colour it has tien ajustable suspention,FMIC,17x8 and 17x9 1/2 OZ racing wheels silver in colour (not on car jew to bauld tyres) BIG cat back exhuast ,auto metre gauges mounted in pod in middle of dash (oil pressure,boost,water temp) and auto metre tacho mounted on drivers A pillar after market blow off valve it ,has big rear wing and body kit to match needs a good tidy up 120,000 k's CHEAP at $14,000 no offers

with number plates SIK-33T as you can see by the pics the fibreglass has some cracks and shit like that

01250001.JPG

user posted image

user posted image

user posted image

user posted image

user posted image

user posted image

user posted image

Link to comment
https://www.sau.com.au/forums/topic/71991-93-gts-t-93-fs/
Share on other sites

  • Replies 73
  • Created
  • Last Reply

Top Posters In This Topic

yes sorry its manual it has a mechanical locker diff (cusco i think )also a nismo clutch and ill be putting more pics up tomorrow of interior and with standard wheels fitted .

it is located on central coast n.s.w and it does need some tidying up from being a daily driver but pretty good con and also price is neg so lets see it go to good home i know some one wants it

Link to comment
https://www.sau.com.au/forums/topic/71991-93-gts-t-93-fs/#findComment-1328147
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
×
×
  • Create New...