Jump to content
SAU Community

Recommended Posts

None of this should ever happen. Your knock sensors should sense detonation and retard timing. All running lower octane fuel will ever do it cause the engine to run slightly slower. The pre-ignition involved in a 4-6 ron octane change is totally insignificant when you are talking about making an engine go backwards. This would never happen. As for cracking ring lands, unless you are running borderline timing figures and something stuffs up in your fuel system ie. reg lets go or pump stops then regular is not going to crack ring lands either.

As for your gurgling popping noise when downshifting...did you set the TPS up right after removing it? if not and you have it set right on the switch point, it will cause it to run like shit. Check for any intake leaks by blocking the hose (crimp it) to your blowby control valve....if the idle drops then you have no intake air leaks, if it stays the same...start looking. How did the old plugs look? can you give a VERY accurate description of the colour of the insulated electrode or the negative electrode or outer case?

the plugs are good, i changed them 8000 ago and ive cleaned them up and swapped them over. i would like to try out someone else's TPS out. I think this might be the problem. ive already cleaned it out wit carby cleaner.. hasnt done much. it could just be stuffed.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So either way it is gearbox out and look what is wrong?  I know about the input shaft bearing. Even before swap/new clutch the it sounded exactly like this: So is that inout shaft bearing or the other was installed backwards?  And can some please tell me the part number for that input shaft bearing? The gearbox is small box from R34 N/A and number is FS5W71C. Thank you  
    • I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
    • D2 and Ksport are essentially the same thing and basically just generic Taiwanese manufacture. Better than ChinaBay crap, but... not top shelf. Öhlins have got to be some of the best dampers around, so likely to be a good option. It's going to get to the point though where I suggest you buy from Oz. We have at least 2x excellent options here. If I were you though, I'd be talking to KW about doing something for the R33. There's bugger all difference between that and the 32. In GTR land, anyway.
    • KW only offers a set for the R32 GTR. Popular options are D2 racing, Ksport or Öhlins. I have a D2 Racing coilover set, though I don't know for sure which one.
    • Well, the good news is you have more than one very good option for new coilovers in and around your country. Worth the drive over to KW to talk about GTR stuff.
×
×
  • Create New...