Jump to content
SAU Community

Recommended Posts

Willing to swap for LATE model (2000 upwards) stock standard hatchback with UNDER 100k. with appropriate cash adjustment. EG: Hyundai accent etc.

RB20det

5 Speed

Sunroof

Mett. Black

Full bodykit (front and rear has been moulded in OZ for me so replacements are available, as i believe it is the only one in Aust)

Aftermarket Clutch

JIC coilovers

GTR Frount mount intercooler

17 x 8 and 17 x 9 Speedstar "agle strusse" alloys

Apexi aftermarket air filter

CD player

aftermarket sterring wheel and gear knob

Boost Guage

3 inch Exhaust.

$16,500

Vehicle is located on the Gold Coast, it is currently having the kit re-painted due to moulding process damaging paint.

Can also Supply Vented fibreglass Bonnet (brand New) for an additional cost. (i believe it is "hipposleek" design)

Please contact me on 0402 807 417

Regards

Link to comment
https://www.sau.com.au/forums/topic/73292-nissan-laurel-turbo-sell-or-swap/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi all, I’ve just finished fitting the timing belt on my RB25, following the standard procedure: rotate the crank twice, release the tensioner, then tighten it down. The belt feels tight, and you can see that clearly in the picture below I’ve heard some people say it’s actually better for the belt to be slightly loose rather than too tight, as excessive tension can lead to snapping. So that’s in the back of my mind. What I’m seeing is this:  • At idle, the belt looks fine.  • But when cranking and especially when revving (around 3–4,000 RPM), there’s a momentary flap/flex or flicker in the belt, which I’ve tried to capture in the video. So my question is — based on what you see, is this slight belt movement something you’d consider normal, or am I just being OCD? Could this amount of movement cause sync issues? Or is it just a harmless bit of flex under load?   from what I know belt flap and flex is expected when crank spins up and pull cam with it Would appreciate any thoughts or similar experiences.     IMG_7656.mov IMG_7657.mov
    • I've replaced the front brakes of my NA to 324 brembos and 350z calipers: i'm going for 225/40-18 up front and 245/35-18 in the back. I have Rays 7.5*19 ET35(225/35) in the front with 5mm spacers otherwise the calipers "lock up/ won't rotate". When i use the calculator i come up with 8*18 ET30 for 225/40...... but not sure i get problems with the calipers. Anyone riding around with 18 inch. that can confirm "that it'll fit"? In the back it's 7.5*9 ET30 (245/30) with the 5mm spacers, but there is no problem with the standard small brakes, so i want to take 8.5*18 ET25 (245/35).
    • Lol.. but then.. always come back to a JDM..
    • Glad to hear. If possible, get your tuner to check air's to make sure everything is still where it should be.
    • The problem with FB/Insta/Reddit etc comments relating to cars is simple. You get to ask a question once, and get one round of replies. For things that can actually be answered in a few lines of text, once, it's fine. After 6 hours, your original question is lost to the void. There are no follow ups, additional questions, anything. No project car is ever such a simple list of questions to ask. You need discussion.
×
×
  • Create New...