Jump to content
SAU Community

Recommended Posts

hey

i have done a search and found alot of good things being said about this turbo for the rb20.

I am looking at upgrading in the near future to possibly one of these...but the thing i havn't been able to find are where abouts i should start looking for one of these...rough prices new and second hand...and how much somewhere would rougly charge me to have this fitted to my car.

All help appreciated

I am in brisbane

thanx

Link to comment
https://www.sau.com.au/forums/topic/74396-hks-2530/
Share on other sites

hey

i have done a search and found alot of good things being said about this turbo for the rb20.

I am looking at upgrading in the near future to possibly one of these...but the thing i havn't been able to find are where abouts i should start looking for one of these...rough prices new and second hand...and how much somewhere would rougly charge me to have this fitted to my car.

All help appreciated

I am in brisbane

thanx

These turbo's respond good, just make sure your exhaust housing isnt too big.

just buy the "HKS" bolt on for RB engine.

They will fit on with everything else untouched... sometimes even the standard ecu will run them "OK"

Link to comment
https://www.sau.com.au/forums/topic/74396-hks-2530/#findComment-1366224
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...