Jump to content
SAU Community

Recommended Posts

I'm running HKS 1000cc Injectors......too big?

I understand that larger injectors are not as efficienct, or should I say control over say smaller ones.

Still couldn't my AFR be improved for highway use say on light loads or maybe a closed loop operation or how about a whole new map that I can just zap in using a laptop. When I want it back to normal I can just re-zap it.

Am I just chasing my tail or should I just put up and shut up and be happy with everything.......who dosen't want to have everything! :headspin:

  • Replies 46
  • Created
  • Last Reply

Top Posters In This Topic

Larger injectors have trouble atomizing the fuel well with small duty cycles.

The larger injectors *nismo and I also thought hks* 'generally' have multiple sprays.

For example they may be a twin spray.

That was my understanding, I could be wrong. ;)

I'm guessing that for fuel to atomise better, the finer the spray or should I say the finer the mist of spray, it will atomise better.

Fuel pressure would not have anything to do with this aspect, I think.

So in larger injectors they can have multiple sprays to makeup for the effiency.

I just checked mine and they are single spray units..... If I change them to something with multiple spray units, then do you thing I might get better effiency?

Thanks MsG_ChRiS... don't I sound the winger!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...