Jump to content
SAU Community

Recommended Posts

Once again got pulled over by a highway patrol in Nunawading... But this time really pissed me off. The police officer was extremely rude and racist.

First of all i wind down my window and the police officer told me that my car is too low. Then i smile at him and told him that this car is completely stock and i didn't do anything with the suspension of the car. Guess how he reacted.....

"When i tell you your car is too low meaning that your car is too low. Don't show me your attitude or i will put your f*cking arse behind the bar" Juz a bit curious here. Is the police officer allow to do that in any way, i mean as verbally using the F word just because i smile at them.

The reason i smile at him is because this is the third time i got pull over and previously the officer defect my car because the exhaust is too loud and the blow off valve need to be pulled out. Therefore, i spent 150 to get a stupid stock exhaust and also the bov out. Then, got pull over a month after that, the officer told me my car is ok after all the inspection.

And now the officer is saying that my car is too low??? I mean WTF??? They each come out with different story. Ok... then the police asked me whether i am still a student. and continue saying that "If you want to drive on my road in Australia you better follow my rule." Come on... is not that i am not following or in any way not respecting Australian rule.. Sigh this officer is just full of bull shit. I am thinking to file a complaint as this is really outraged.

By the way, i did ask him do you guys always pull skyline over? and he said yes we do and because most of the skyline have problem with it. Sigh... time to for a change of car...enough is enough.....

Am i allow to post up the detail of the police officer who is being extremely racist and rude so that when the same thing happen to any of the skyliner out there we can beware and also immediately file a complain upon him.

Link to comment
https://www.sau.com.au/forums/topic/75944-stupid-highway-petrol/
Share on other sites

Am i allow to post up the detail of the police officer who is being extremely racist and rude so that when the same thing happen to any of the skyliner out there we can beware and also immediately file a complain upon him.

Yeah! Post his details! :jump: Oh and it's "patrol" I thought this post was going to be about petrol? LOL

Whenver cops pull you over, dont they have something that records every-word, from you and the police??? Maybe file a complaint and ask for video footage or something!!!

But yes, they arent allowed to swear at you.. go speak to another police or someone higher in charge..

You never told us, if you got defected or not.. so did u or not?? and did u tell him, again and again its stock height??? Finish off your story mate..

His name is B SHENTON and his rank is S/C if this make any sense to you out there. And his number is 32145 station in Whitehorse T.M.U.

Yes i got defected and my car registration will be suspended if i don't "fix" it whithin 7 days. What can i fix when nothing is wrong with the car. So i will just drive the car to vicroad without doing anything to it.

No worries. Just if they get rude, ask the conversation to be recorded and they get nice again. If they are going over the car to defect it ask questions as they record, such as "why do you think it is too low? How are you going to measure that? Where can I find the law that covers this defect?" and then that can be asked for in court if necessary. You will see a complete change in their attitude if they are being rude and ignorant and especially racist.

Whenver cops pull you over, dont they have something that records every-word, from you and the police??? Maybe file a complaint and ask for video footage or something!!!  

But yes, they arent allowed to swear at you.. go speak to another police or someone higher in charge..  

You never told us, if you got defected or not.. so did u or not?? and did u tell him, again and again its stock height??? Finish off your story mate..

On another note this ***n pig didnt swear directly to u howhow82, but u can still say that u got scared of this pig cause he threatened u even though u didnt do anything

i hate these highway cops, nothing but bad luck for me aswell, they dont know a lot of the rules themselves

why do u get pulled over anyway? random?

juz curios :D

"I pulled you over because you were doing 76 in a 60, while running a red light and sideways"

errr I don't know about that....

"And your car is too low"

Well I can tell you the car isn't too low, I have checked it (meanwhile when I got home I double checked and he was right...I guess losing some tread made all the difference)

*breath test*

"Ok, well let's agree that the light was yellow...and I'll give you the benefit of the doubt on the height...keep this *breathiliser pipe* that is 100mm, if that can touch the car, it's too low. I will let you off on breaking traction *notice he changed his terminology from 'sideways' to 'breaking traction' *

ok thankyou

*writes speeding fine*

--------------

For the record

- I wasn't sideways - I broke traction a *little* just before I changed gears (turning + hit full boost with not much tread)

- The light was yellow, but it was very close

- I can't argue speed, cause my speedo was dead (ironically the reason I was driving is cause I was on my way home to fix the dam speedo!) But I didn't mention it to the cop. I wasn't sure if he'd just have another thing to pin on me

- The car is too low buy about 5mm at one point (part of zorst) and I am going to be fixing that when I have the money (different springs)

All in all he was really decent about it, I thought I was in a LOT more trouble. There are some nice cops around.

Meanwhile I got done again on the way home from work in my other car only a week later, and now if I do anything wrong for the next 2 years i lose my license :D the 2 speeding fines (exceed by less than 15kms) racked up to 6 points, I only had 8 to start with...doh. Oh well, my own fault isn't it.

Actually, Is it legal to tell them they are being recorded?

Eg. I use a O2 XDA2 (PDA phone), if I am ever pulled over by the police.

am I allowed to say "Sir, before you say anything, this conversation is being recorded, how can I help you officer?"

is that legal?

yaf28f: ofcourse it's legal... you can get a video camera out of the boot and start filming if you like :D

Haha, thanks, I think I'd stop at the voice recording. they might think I'm trying to make a b-grade porn movie.

But seriously, my friend tried to take a picture once when I got pulled over with a camera and he said that we weren't allowed to for security reasons (eg. if he had a photo of him we could get someone to do something bad to him - not in those words).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If as it's stalling, the fuel pressure rises, it's saying there's less vacuum in the intake manifold. This is pretty typical of an engine that is slowing down.   While typically is agree it sounds fuel related, it really sounds fuel/air mixture related. Since the whole system has been refurbished, including injectors, pump, etc, it's likely we've altered how well the system is delivering fuel. If someone before you has messed with the IACV because it needed fiddling with as the fuel system was dieing out, we need to readjust it back. Getting things back to factory spec everywhere, is what's going to help the entire system. So if it idles at 400rpm with no IACV, that needs raising. Getting factory air flow back to normal will help us get everything back in spec, and likely help chase down any other issues. Back on IACV, if the base idle (no IACV plugged in) is too far out, it's a lot harder for the ECU to control idle. The IACV duty cycle causes non linear variations in reality. When I've tuned the idle valves in the past, you need to keep it in a relatively narrow window on aftermarket ecus to stop them doing wild dances. It also means if your base idle is too low, the valve needs to open too much, and then the smallest % change ends up being a huge variation.
    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
×
×
  • Create New...