Jump to content
SAU Community

Recommended Posts

anyone have a Heat gun I can borrow for a day?

Trying to make home made Cold Air Induction on my N/A car...

I just need to bent few PVA pipes, I mean PVC pripes...heheh :D

also Open to suggestions...

because I dont have Turbo... the hole where Stock intercooler piping goes is closed off, so I am plan to cut hole and feed a pvc pipe and close rest of pod filter and O2 censor with soem clark rubber heat sheild!

cheers

Joe

Link to comment
https://www.sau.com.au/forums/topic/7775-a-heat-gun/
Share on other sites

Ok having trouble with all the materials...

went to clarks rubber and burnnings to get some inspiration for the CAI...

I have found 3meter silver coil vent induction pipe but they cost too much and let alone dont need 3 metere/$21.60.

Found nice silver sheet of aluminium $18.23 or some thing like that, quite suitable...

found foam with silver lining but it also pretty fragile, not sure how it will hold with all the heats from the engine...

my best option is to go with aluminium sheet for the box and for piping...

saw few PVC pipes but hey are booldy heavy and there is not many choice to shoose from, they are rock hard and not sure how malleble they are with heat gun... but I shall try!

anyway thanks for reading... you polly think I am stingie one but yeah I am student with no $$$ :lol:

BTW can anyone show me how to take off the Front stock spoiler for series one?!?

cheers

Joe

Link to comment
https://www.sau.com.au/forums/topic/7775-a-heat-gun/#findComment-116536
Share on other sites

Joe, the air duct stuff from bunnings is bloody expensive, try an airconditioning supply place (sorry forgot the name of where I went, but it only cost me $11 instead of $21). That foam stuff from clarks seems ok in my car, haven't had probs yet and you have to buy it by the lineal metre, so enough for 2 partitions.

Maybe someone will go halves on both and save you even more dollars (sorry I already gave my leftovers away)

Steve

Link to comment
https://www.sau.com.au/forums/topic/7775-a-heat-gun/#findComment-116540
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You're not the first person that's said that about this car lol. A Touring wagon GT in Spark yellow mica would be the dog's danglies 😆 I will keep an eye out for a future purchase for sure. The seats are almost like the OEM Recaros... electric adjustment for fore/aft and tilt movements except reclining.   
    • Yes!! I love these! It's a shame its not the wagon though!   Thank everything that's holy that it doesn't have the interior of the Aussie delivered ones. Those seats are so much nicer.  
    • I'm both sorry and thankful that you do that. 
    • 2001 BE5D Subaru Legacy B4 RSK (3rd gen) EJ208 (pink injector) Twin Turbo 280PS 5-speed manual Full time 4WD "RSK" grade which means all of the above LQC option which means stock rear spoiler  I got it primarily to export to someone outside Japan who was interested. These BE5 Legacy B4 RSKs are going through a bit of a resurgence right know in Japan as they are one of the few cars from the "turbo, manual, RWD/4WD, 280hp gentleman's agreement era" cars that don't require stupid money to purchase. Which for some people might be a good opportunity to get as a base for restoration. If I can't find anyone to purchase it I will certainly be doing that myself over the long term. Why? Because it's properly fast in stock form, handles well enough for a GT sedan, there's still enough aftermarket and (if you can wait a while) genuine part support to make it a restoration candidate (<-- that will only get worse over time so it's a case of do it now or choose get a BL5 4th Gen). Mechanically it's fine, has only 89,200kms on the odometer. The problem with this car is that the body and exterior trims are weathered from at least the last 10 years being parked outdoors. I'm the 3rd owner, the first owner was the one that had it for 14 years and barely drove it, had a low-speed front impact (which didn't damage anything behind the radiator support) and got it fixed and sold it. The 2nd owner put most of the kms on it and parked it outside for the last 10 years, hence the door rubbers have seen better days but if you overlook those cosmetic details, it presents pretty nicely. There is some minor rust on the LH rear wheel arch which I'll have looked at too at some stage.  Also as you'd expect from a car this age, the clear top coat is gone, leaving a satin finish on the roof.  Mechanically it's fine (as you would expect from a car with less than 100K kms) but the steering does feel slightly vague around the centre position at higher speeds. So first on the list is to get the steering rack bushes looked at. There's also the Lock button on the remote which doesn't work, but the Open button does.... it means that the anti-theft system thinks it's always open? It seems like if you open the car and don't start the engine within 3 mins or so the anti-theft kicks in again without any beeps or signals. So if you got to start it after that, it won't. You have to push the open button again. That's how I understand it anyway. Just a small irritation but not a big problem to sort out. There's only one mod, the Wangan SPL muffler. Just a tad louder than stock. It's a really good mod for those who don't want to wake the neighbours but still want to hear a more prominent unequal length header EJ20 sound. Anyway I hope to get all those things done eventually, that is unless someone wanted to import it to their country from Japan (where I live). I'm open for negotiations as I really would like a Skyline... but this will definitely suffice in the meantime 🙂 *Disclaimer: This is how I picked it up from the dealer, minus the stuff on the back seat. I haven't cleaned the engine bay or done a thorough exterior clean, aside from spray painting the wipers. 
    • Wow, even with the Audi logo centre caps. I love OEM wheel mismatches. 
×
×
  • Create New...