Jump to content
SAU Community

Recommended Posts

0.5 o/s Forged Pistons, rings and bearings replaced at 70,000 klm, Shot peeneed, knife edge, balanced and nitrided crank, rods shot peened and balanced, tomie rod bolts, ceramic coating to pistons, teflon coated skirts, new timing belt, hi pressure oil and high flow water pump. Rebuild cost $5500 just in parts!

Oil filter, engine, gearbox, Diff oils changed at last service

Kei office front coil overs (fully adjusable with camber plates)

cusco rear coil overs with top hats

cusco front castor rods (tension rod?),

cusco front and rear strut braces

Apexi FMIC intercooler

Turbo extractors (fitted 2 weeks ago cost $400 + fit),

***imoto exhaust, front pipe, de cat pipe,

HKS pod filter

Light weight billett flywheel (installed with engine)

heavy duty clutch (full face installed with engine)

omori Water temp, boost, Oil pressure and oil temp (oil temp fitted but needs to be hooked up) gauges, HKS turbo timer,

Mazdaspeed steering wheel (i dont know why this is fitted but it is)

15'' Volk racing wheels

Endless front and rear pads ($400 per Set)

Braided brake lines (worth $350)

Torsen LSD 4.3:1 Ratio

great body for age apart from Damage. Quoted $480 + Parts (bonnet (about $150), bumper (about $100-150), passenger side guard (about $100) and light ($150-$200) and and paint for repair, crashed on the way to compliance and lost intrest. Hit a power box in industrial area at 40 klm. There would have been less damage but the last owner removed the bumper bar support. Looks worse then really is.

Made 168 kw at the wheels (dyno'd after manifold fitted)

The car is uncomplied and unregistered (just imported), add $1300 For compliance then normal rego and insurance costs.

Strictly no time wasters or Joy riders (for obvious reasons) Heaps of high res pictures available on request

180SX CA18DET (Rebuilt w/ forgies) coilovers Volk Minor dama

0.5 o/s Forged Pistons, rings and bearings replaced at 70,000 klm, Shot peeneed, knife edge, balanced and nitrided crank, rods shot peened and balanced, tomie rod bolts, ceramic coating to pistons, teflon coated skirts, new timing belt, hi pressure oil and high flow water pump. Rebuild cost $5500 just in parts!

Oil filter, engine, gearbox, Diff oils changed at last service

Kei office front coil overs (fully adjustable with camber plates)

cusco rear coil overs with top hats

cusco front castor rods (tension rod?),

cusco front and rear strut braces

Apexi FMIC intercooler

Turbo extractors (fitted 2 weeks ago cost $400 + fit),

FGK exhaust, front pipe, de cat pipe,

HKS pod filter

Light weight billet flywheel (installed with engine)

heavy duty clutch (full face installed with engine)

omori Water temp, boost, Oil pressure and oil temp (oil temp fitted but needs to be hooked up) gauges, HKS turbo timer,

Mazdaspeed steering wheel (i don't know why this is fitted but it is)

15'' Volk racing wheels

Endless front and rear pads ($400 per Set)

Braided brake lines (worth $350)

Torsen LSD 4.3:1 Ratio

great body for age apart from Damage. Quoted $480 + Parts (bonnet (about $150), bumper (about $100-150), passenger side guard (about $100) and light ($150-$200) and and paint for repair, crashed on the way to compliance and lost interest. Hit a power box in industrial area at 40 klm. There would have been less damage but the last owner removed the bumper bar support. Looks worse then really is. Made 158 kw at the wheels (dyno'd after manifold fitted) The car is uncomplied and unregistered (just imported), add $1300 For compliance then normal rego and insurance costs. Strictly no time wasters or Joy riders (for obvious reasons) Heaps of high res pictures available on request

Price $9,200

Kilometres 97,000

Body 2 door Coupe

Colour Metallic Grey

Interior Colour Grey

Transmission 5 speed Manual

Engine 4 cylinder Petrol Turbo 1.8L (1809cc)

$9,200 as is

Located in Sydney, epping area.

Phone only 0403 108 701

647804.jpg

647791.jpg

647797.jpg

647787.jpg

647806.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...