Jump to content
SAU Community

Group Buy - Genuine Hdi Intercooler Piping Kits - From $437


Recommended Posts

  • 3 weeks later...

Hey I noticed on the site you've got an intercooler on a GTiR on your site. Did you use this piping kit to fit it to that GTiR? Is moving the washer bottle and removing tow hook cover necessary for these kits? Any how-to-guides I can have a look at?

Thanks,

Andy

Hey I noticed on the site you've got an intercooler on a GTiR on your site. Did you use this piping kit to fit it to that GTiR? Is moving the washer bottle and removing tow hook cover necessary for these kits? Any how-to-guides I can have a look at?

Thanks,

Andy

Piping kit on the gti-r was actually a hybrid copy from one of the group buys on here from one of the other guys (I couldnt be bothered getting in 50 piping kits just to fit my one.... lol)

The washer bottle was moved over a bit and radiator overflow was also moved, tow hook was removed.

I don't have any how to guides at the moment, although the genuine HDi kits that we have coming in come with full instructions. I only have 2 piping kits for gti-r's coming in as there wasn't much interest in these. So 2 piping kits left for gti-r.

Cheers,

Greg

So the HDi ones you have are like the Hybrid ones? Will they suit a 450x300x75 intercooler? I don't want to use a 600x300x75 because I believe most of it is surface area isn't being used efficiently and its just a waste.

So the HDi ones you have are like the Hybrid ones? Will they suit a 450x300x75 intercooler? I don't want to use a 600x300x75 because I believe most of it is surface area isn't being used efficiently and its just a waste.

Hi mate, have a search on the net and you'll see what HDi is.

We do not sell Hybrid..

Unfortunately the piping will be slightly off if used on a car with 450mm cooler as the kit is designed for 600mm cooler.

The 600's aren't bad especially when you can also get our new GT Spec kit (tube and fin)

At the end of the day its personal opinion.

Ship is confirmed to land on the 7th of August.. Get in quick :D

Cheers,

Greg

  • 2 weeks later...
  • 2 weeks later...

;)

thanks , Greg ,

package arrived safe and intacked ,All peices were there . looking forward to installing the intercooler,Now the fun starts , Also tahnks to Australia Post .Bunbury WA

Edited by beetle
Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
×
×
  • Create New...