Jump to content
SAU Community

Recommended Posts

I have had them on my gts-t for about 6 months I guess now and I have never heard of them hitting the callipers even on full lock etc but I must add though that they seriously only just clear the callipers and I mean just. I got mine off "driver" and SAU guy from Perth for I think $875 delivered to Canberra which is a smidgen more than other sets going but make sure you get high res pics almost everyone else that said yea I got a set in good nick were full of crap they had so much gutter rash on them it wasn’t funny. I am happy i paid a little extra because these ones are alot cleaner. Anyways I only have two pics of my car with the rims on and it’s not a great angle but you get the gist. they look ok for the price they cost.

I have had them on my gts-t for about 6 months I guess now and I have never heard of them hitting the callipers even on full lock etc but I must add though that they seriously only just clear the callipers and I mean just. I got mine off "driver" and SAU guy from Perth for I think $875 delivered to Canberra which is a smidgen more than other sets going but make sure you get high res pics almost everyone else that said yea I got a set in good nick were full of crap they had so much gutter rash on them it wasn’t funny. I am happy i paid a little extra because these ones are alot cleaner. Anyways I only have two pics of my car with the rims on and it’s not a great angle but you get the gist. they look ok for the price they cost.

They are not going to hit the calipers at full lock , lock or no lock makes no difference . If they hit ans i have seen some that do they will hit on hard cornering when the wheels will flex , if you just drive easy they probably wont hit .

If you find they hit 1- 2 mm spacers will fix that but they are not legal .

The R34 GT-t rims fit perfectly there is not calliper or off set problems. I was running a set on my G/F 33 gts-t for a month. They were then put on an R32 GTS-t and that was a totally different ball game. Anyone one think of doing this you will need to run spacers on the front otherwise they don't clear the calliper, the rears go on no worries.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...