Jump to content
SAU Community

X3 R33 CF BONNETs - SELLING CHEAP! MINOR DAMAGED! BUT IN VERY GOOD CONDITION!

JDM Concept
 Share

Recommended Posts

JDM Concept Mentor

JDM Concept

Posted
Posted

hi people

i have 3 cf bonnets for GTR33 up for grap.

They will fit GTR33 and GTS33 only if you change the hinges on left and right side and the latch to those of GTR33.

The only problem is that there are some damages on each bonnet.

They are MINOR damaged on various degree.

Most can be easily repaired doing your own DIY kit. You need fiberglass repair kit to do so.

I usually sell the bonnet for $850 but much more on other shops. usually may cost $1000 and up.

I am selling them below cost price!

- R33 BONNET NO. 1 = $400 (47% off my price)

Link to Bonnet 1 pics

CONDITION RATING 7/10. Minor damaged. can be fixed easily. some marks cant be removed but not visible unless on close up view.

- R33 BONNET NO. 2 = $600 (30% off my price) (SOLD)

Link to Bonnet 2 pics

CONDITION RATING 9/10. Very very minor damaged. can be fixed up easily

- R33 BONNET NO.3 = $550 (35% off my price) (SOLD)

Link to Bonnet 3 pics

CONDITION RATING 8.5/10. Very minor damaged. can be fixed up easily

I DONT MIND SHIPPING INTERSTATE, I WILL PACK AS WELL AS I CAN BUT I CANT BE HELD RESPONSIBLE SHOULD ANYTHING HAPPEN.

MY COURIER COMPANY CHARGES $95.00 PER DELIVERY. COST MORE TO TASSIE AND PERTH.

IF YOU HAVE YOUR OWN DELIVERY COMPANY, PLEASE FEEL FREE TO USE YOUR OWN.

Jenny1983 Rookie

Jenny1983

Posted
Posted

I am very interested in purchasing a bonnet however a few questions first:

1. How did they all get broken? Isn't carbon fibre supposed to be very durable and hard to tear/break?

2. Does this breakage compromise the stability of the bonnet?

3. Why do you need to purchase gtr hinges for the bonnet fit onto a gtst? Isn't the only difference between a gtst and gtr front-end the pumped goards, rb26dett and ancillaries for 4wd?

4. Why are ALL of them broken in similar positions?

5. What is the brown marks on the first bonnet, are they scratches? Why are they brown?

6. It appears that on some of the pictures you have used a blurring tool with a photo editing program (i.e photoshop), is this correct? If so, what are you blurring?

7. The bonnets all appear to be exactly the same style, why the dramatic changes in price for very similar damage?

8. where are you located, and how do you propose delivery?

Sorry if the questions seem silly, I am unexperienced with CF. If you could let me know the answers to the questions that would be great!.

JDM Concept Mentor

JDM Concept

Posted
  • Author
Posted
I am very interested in purchasing a bonnet however a few questions first:

1. How did they all get broken? Isn't carbon fibre supposed to be very durable and hard to tear/break?

2. Does this breakage compromise the stability of the bonnet?

3. Why do you need to purchase gtr hinges for the bonnet fit onto a gtst? Isn't the only difference between a gtst and gtr front-end the pumped goards, rb26dett and ancillaries for 4wd?

4. Why are ALL of them broken in similar positions?

5. What is the brown marks on the first bonnet, are they scratches? Why are they brown?

6. It appears that on some of the pictures you have used a blurring tool with a photo editing program (i.e photoshop), is this correct? If so, what are you blurring?

7. The bonnets all appear to be exactly the same style, why the dramatic changes in price for very similar damage?

8. where are you located, and how do you propose delivery?

Sorry if the questions seem silly, I am unexperienced with CF. If you could let me know the answers to the questions that would be great!.

1. How did they all get broken? Isn't carbon fibre supposed to be very durable and hard to tear/break?

please refer to this thread for reference

http://www.skylinesaustralia.com/forums/sh...719#post1331719

the bonnets were damaged in transit. mishandled. i tried to get claimed but failed. i was holding them as proof but my claims was denied.

anything is breakable even your skyline! i guess it meet a lof impact when handled. trust me its not pretty when it arrived.

2. Does this breakage compromise the stability of the bonnet?

with proper repairing using firberglass repair kit and reinforcing the ribbing with fiberglass you should be able to get you full 100% stability back. it is a simple job and simple tool to use. many people in bodykit industry should tell you is a an easy job to repair especially bonnet 2 and bonnet 3.

3. Why do you need to purchase gtr hinges for the bonnet fit onto a gtst? Isn't the only difference between a gtst and gtr front-end the pumped goards, rb26dett and ancillaries for 4wd?

you are incorrect im afraid. we tried to fit on a gtst before and the hinges and latches does not match. the bonnet are of the same shape and fit perfectly but the position of the holes on each side of the hinges are different and so is the latch. other than that is perfect alignment. however i must say that this is just a theory at the moment. never been proven before. my comment is based on one time effort to put on in a gtst

4. Why are ALL of them broken in similar positions?

becos they are mishandled in similar fashion hence it is damaged in similar way.

5. What is the brown marks on the first bonnet, are they scratches? Why are they brown?

there is no scratches on any of the bonnets. one bonnet no 1, they are like some defect due to mishandling. the underlying clear coat has given way. it is not a bad thing. it is visible on some angle but if you on the car horizontally, you cant even see it unless you are at some near distance. i have decided to take this pictures to show all the defects and not want to hide anything.

6. It appears that on some of the pictures you have used a blurring tool with a photo editing program (i.e photoshop), is this correct? If so, what are you blurring?

i take the photo as it is. no editing what so ever. i have been an honest seller everywhere i go.

this is the screen-shot of the traders rating. i am sure you will find me to be an honest seller. :P

feedback.jpg

7. The bonnets all appear to be exactly the same style, why the dramatic changes in price for very similar damage?

bonnet 1, has the most damaged among the 3. cracks and some clear coat issue which is not visible when you put it on.

bonnet 2 has very minor damage, slight hairline crack1

bonnet 3 has minor damage, 2 minimal crack as shown in the pics

8. where are you located, and how do you propose delivery?

im in sydney. i prefer if people can pick up in sydney. if interstate, i am happy to deliver it at extra $95.00. i cant afford to foot for the fee as i am already losing money for them. howver, i prefer that you arrange your own transport company and i will be more than happy to corporate with you.

Sorry if the questions seem silly, I am unexperienced with CF. If you could let me know the answers to the questions that would be great!.

No worries! all question answered! :)

lwells Grand Master

lwells

Posted
Posted

The breaks are in the FRP (fibreglass) structure, not the carbon fibre top layer.

Edit: Doh. That will teach me for not refreshing a thread between reading and posting.

JDM Concept Mentor

JDM Concept

Posted
  • Author
Posted
if i got them could u hook me up wit the parts nessarsary to put them on my R33 GTS-T???

if yes consider bonnet 2 SOLD!!!

you need to source the hinges and the latch on your own unfortunately. if you live in liverpool. there are a lot of places that you can ask around. dont think is an issue here. :wave:

JDM Concept Mentor

JDM Concept

Posted
  • Author
Posted
so its doesnt fit a r33 gtst???? and if so is it a s1 or s2

interested in bonnet 1

it will fit if u change the latch and hinges using a GTR33 one.

 Share
Go to topic listing


  • Latest Posts

    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      Definitely do-able haha. I will give it a try if the fuel pump hanger does not solve the issue. Just need to find some quiet time in the area, Malta is like a big city and I live right next to the main hospital so it is very busy during the day. I'll be installing it in about 2 weeks, found a garage that is pretty knowledgeable and has the necessary tools. This garage has worked on multiple builds, even for competitions. They even asked me to stay with, so I should be fine.
    • GTR32 Jeff
      R33 GTR running -9 with no tune

      By GTR32 Jeff · Posted

      Just to add, I found the r32 gtr ecu the most forgiving, the r33 one would get the shits. 
    • GTR32 Jeff
      R33 GTR running -9 with no tune

      By GTR32 Jeff · Posted

      For what it’s worth I drove my gtr for over a decade with gt-ss as a true daily after I pulled off the -5s, I had it engineered and went with stock ecu etc.  never skipped a beat.    I would only worry if you can’t get good fuel all the time in a tropical paradise
    • Bwagz
      Engine model

      By Bwagz · Posted

      I bought an engine from a friend of a friend many years ago, it was sold to me as a RB25det Neo.    recently I started pulling it apart and noticed that the intake manifold was pretty different from others that I had seen on RB engines so did a bit of research and found that it was a non turbo manifold. So I’m sceptical now that it is a NEO DET and just thinking it’s a NEO DE (it does have a turbo strapped to it currently).    can you identify the engine model from the numbers on the block?
    • GTSBoy
      R32 GTS (RB20DE) Injectors Replacement

      By GTSBoy · Posted

      Yeah you can. Cable tie the gauge to a windscreen wiper, or run it into the car and hold it with one hand, or have the neighbour's kid run alongside and tell you what it says.
×
×
  • Create New...