Hot Bits

[Ghostrider]

Hi Guys,

I know I have been a bit dead lately, but that goes with when you get told you have a malignant cyst on your large intestine.

Anyhow, ALL my hot bits are up for grabs, as the PNV is staying as an L series quickie.

If your interesed get in touch.

Dennis

[stu_r30]

pm sent dennis

im calling shotgun on the front bar and turbo

[stagefumer11]

what have ya got ?

[Ghostrider]

what have ya got ?

<{POST_SNAPBACK}>

All the bits I have have been well documented on these forum pages.

I was planning an RB30/25DET conversion so everything is pertaining to that.

Trust inlet plenum NEW complete, HKS ext wastegate cast iron exhaust manifold, HKS 40mm ext wastegate 10psi spring, a/mkt 40mm ext wastegate 14psi spring, RB25DE DOHC head complete, R33 GTS25t gearbox, R32 RB20DET gearbox, NISMO short shifter, NEW RB30E harmonic balancer, 1.0mm o/size ACL Race Pistons suit RB25DET (forged), RB25 bottom end, RB30 GTS1 bottom end, R32 245rwkw ECU incl loom, Billet Steel flywheel that will accept 10 in VL Turbo clutch, NEW VL Turbo clutch plate, N1 Oil Pump & Adaptor, VL Turbo Oil Pump, GTR Speedo drive, NEW GTR valve springs, Gates timing belt for RB30 DOHC conversion, RB25 throttle body, 2 x Z32 AFM's, and more.

[V8skylineMAN]

Trust inlet plenum NEW complete, HKS ext wastegate cast iron exhaust manifold, HKS 40mm ext wastegate 10psi spring, a/mkt 40mm ext wastegate 14psi spring, RB25DE DOHC head complete, R33 GTS25t gearbox, R32 RB20DET gearbox, NISMO short shifter, NEW RB30E harmonic balancer, 1.0mm o/size ACL Race Pistons suit RB25DET (forged), RB25 bottom end, RB30 GTS1 bottom end, R32 245rwkw ECU incl loom, Billet Steel flywheel that will accept 10 in VL Turbo clutch, NEW VL Turbo clutch plate, N1 Oil Pump & Adaptor, VL Turbo Oil Pump, GTR Speedo drive, NEW GTR valve springs, Gates timing belt for RB30 DOHC conversion, RB25 throttle body, 2 x Z32 AFM's, and more.

<{POST_SNAPBACK}>

how much for the lot of the rb30/25 conv setup?

[Ghostrider]

how much for the lot of the rb30/25 conv setup?

<{POST_SNAPBACK}>

Jason,

Email me [email protected] and tell me exactly what bits you need.

We can then work on the bits & prices.

Dennis

[Ghostrider]

how much for the lot of the rb30/25 conv setup?

<{POST_SNAPBACK}>

The whole conversion???????

RB30E Block, crank, rods, caps etc

RB25DE DOHC 24V Head

GTR Valve Springs

Timing Belt

Tensioner Pulley from RB25DE block

1.0mm o/size ACL Forged Race Pistons

N1 Oil Pump and adaptor or VL Turbo Oil Pump

Standard Inlet Plenum & Runners or Trust Inlet Plenum

R33 GTS25t 5 speed Gearbox or R32 RB20DET 5 speed Gearbox

RB30E Harmonic Balancer

RB25DE Throttle Body

Z32 AFM

RB30ET Billet Steel Flywheel

VL Turbo Clutch Pressure Plate

That's probably about it.

Tell me how much of this conversion you want and I will price it up.

Cheers,

Dennis

[V8skylineMAN]

RB25DE DOHC 24V Head

GTR Valve Springs

Timing Belt

Tensioner Pulley from RB25DE block

1.0mm o/size ACL Forged Race Pistons

VL Turbo Oil Pump

Standard Inlet Plenum & Runners

R3 GTSt 5 speed Gearbox

RB25DE Throttle Body

Z32 AFM

RB30ET Billet Steel Flywheel

VL Turbo Clutch Pressure Plate......price for above and price for no clutch/flywheel/gearbox