Jump to content
SAU Community

Recommended Posts

The actual bulb part can be bought from dick smiths. I bought some instore and some from their online store. I bought twice because I didn't realise how orange they'd look without the blue caps.

Suffice to say, i'm looking for the blue caps now.

  • Replies 78
  • Created
  • Last Reply

Top Posters In This Topic

so the actual bulbs are orange? do they turn white with the blue caps on? the original is clear so does that make a difference? been to 2 dick smith stores and they dont have any. know the part no.?

Read this thread, i'm sure I posted it in here somewhere?

And yeah, it lights up a really bright orange. I thought it'd be like a ceiling globe, but it's not.

With the blue caps? I don't know. I've never seen it. I removed the caps to change my dead globes, but they were melted on and ripped without any real effort.

This is why i'm hunting for the blue silicone globe caps. I replaced the light in the hazzard button, and it had a tiny blue cap on it, but it lights up a really nice white. I'm hoping that's the deal with the AC unit too.

I'll keep you posted here, cause I should be receiving a whole AC unit to stuff around with.

  • 4 weeks later...

found the perfect globe and only 70 cents from repco, or can get from auto elec...

part no 47702 dash globe

pic shows exact same size, removed second blue cap perfectly with a 'precise screwdriver' smallest flathead in the pack, angled down on globe and slowly slide up to top, few mm each time turning around after each time.

fixed hazard light also with a grain of wheat globe as same size also. much harder to fix tho

pic of globes all fixed aswell

post-23924-1157350768.jpg

post-23924-1157350948.jpg

Yeah, those are the "grain of wheat" globes that you can get from Dick Smiths.

Looks like someone's been into your A/C unit with them too... The right-hand side is what mine used to look like without the blue caps on them.

My hazard button turned out a lot whiter than that...

found the perfect globe and only 70 cents from repco, or can get from auto elec...

part no 47702 dash globe

Nice one Brad,looks like someone finally got lucky with these bulbs!

70c is what i was hoping for!

So repco is where you got them from??Hopefully the sydney stores will also carry these-im gonna call them now.

Just hoping they are the same size on the 32 as the 33.Im sure they wouldnt have gotten THAT much bigger!!

Yeah, those are the "grain of wheat" globes that you can get from Dick Smiths.

Looks like someone's been into your A/C unit with them too...

This is NOT TRUE.Crappy dick smith does NOT stock this size bulb as has been discussed in this forum countless times before.Their catalogue is wrong.Anyway,I dont even know why people still shop there as its a total rip since they were taken over by woolies. ;)

This is NOT TRUE.Crappy dick smith does NOT stock this size bulb as has been discussed in this forum countless times before.Their catalogue is wrong.Anyway,I dont even know why people still shop there as its a total rip since they were taken over by woolies.

Not true? I ordered three and got three. Exactly the same size, same length legs, same voltage and wattage. Identical to the dead ones I pulled out.

Since you're so sure of yourself, and because i'm such a blatant liar, i'll stop telling people to go get these globes. =-[

http://dseau.resultspage.com/search.php?p=...amp;isort=score

cookie--monster

i found that the bulbs from dick smiths were too small but right size for the hazard light 'grain of wheat' bulbs. Can get the dash globes from auto elec probably for same price instead of waiting. Measure your bulbs from your current A/C should be 4mm wide and about 8mm high i think. You have the blue caps on the old ones? you get them off alright?

So did you use the same ones for the A/C unit, Brad? I did.. they were identical.

I used smaller ones for the hazard and demister buttons. The smaller ones I got from JayCar, and had yellow pigtails on them. That was the size of the original ones when I pulled them out, so i'm pretty sure i'm correct with the sizes?

yep thats right, the grain of wheat ones with the yellow pigtails i got from dick smiths tho, same thing just different price im gathering, found that the wheat globe cost more than the dash globe. Just an easier way of getting A/C globe thatn ordering from dick smiths online.

nah the ones i got from dick smiths were the grain of wheat globes which i put into my hazard light as tiny. The globes for the A/C light was from repco, this is for a r33 tho i dunno if same globes in 32 or 34s

Not sure how links work here but I found a post of a while ago about how to replace the "grain of wheat" bulbs in the aircon unit.

Hopefully it is shown below. If not, you could always try search.

I read the thread linked by midnight. Have just replaced the bulbs with the "grain of wheat ones from Dick Smith.

Cost was $2.50 for a pair.

1. Take the control unit out

2. Undo the two bulbs with a quarter turn

3. Unwrap the thin wire holding the bulb to the holder that makes the actual "contact"

4. Carefully push a toothpick under the blue condom and roll it around the bulb to separate the rubber from the bulb.

5. Reverse order for new bulbs.

Simple. (Although on the one pictured I left a tiny bit of the blue rubber on the old bulb. I managed to get it off completely intact with the other one.)

Look closely and you can see the wire wrapped around the base of the holder. (This is the replacement globe in place)

Enjoy!

El Bee

Yeppers, I think I was in that post somewhere.

I'm quite quite certain that the "grain of wheat" are the slightly larger globes used in the A/C unit. They have a solid bare wire.

The smaller yellow pigtail globes are for hazard/demister. You have to strip the yellow shielding off, and the wires are stranded.

I have done both, and i'm very sure this is correct. I have just received another second hand A/C unit, all original, with working bulbs and globe caps. They are exactly the same size as the grain of wheat. I suspect that cookie-monster got the wrong globes from Dick Smiths when he asked for "grain of wheat", because the ones I got were the same as the online catalog picture, and identical to what came out of my (unopened) A/C unit.

R33 series 1 and 2 should be the same.

when i asked for grain of wheat globes they gave me the yellow pigtail wire tiny ones at dick smiths, so depends on who you ask i guess, besides the globes i bought were 70c so better than 2.50 for a pair, hardest part is to get the blue cap off. im sure there is enough help here for anyone needing to do it.

Ah right.. if you look on dse.com.au and search for "wheat", it comes up with the correct globe.

So it's a case of mistaken identity when you went in and asked for them.

So the answer still stands. Grain of wheat for A/C, 12v yellow pigtail for hazard/demister.

so the actual bulbs are orange? do they turn white with the blue caps on? the original is clear so does that make a difference? been to 2 dick smith stores and they dont have any. know the part no.?

Brad, you know the answer to this now, but i'll mention it for everyone else...

The blue silicone cap (stock) takes the orange glow out of the globe, and makes it a VERY light blue.. almost dead white.

When I did the hazard and demister, the demister now lights up a really nice white.

I'm doing up a proper guide for the DIY area with a spare A/C unit I picked up. Complete with what it looks like with and without the cap, how it looks with LED, and whatever other combo's I can think of.

EDIT: I'm also looking into whether the grain of wheat globes come in different wattages, and what the stock ones are roughly rated at. There is no writing on the stock globe.

Edited by RANDY

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So could it be assumed it has been installed intentionally with potentially a power FC boost controller kit? 
    • Had my rig on Matt's dyno at PITS the other day. After a few years between tunes I added a few sensors and swapped intercoolers. Result. 553hp at 26psi. Not bad for an FJ20 that was built in 2007. The problem.. It filled the overflow bottle on hard runs which leads me to believe the head gasket isn't sealing. I have a coolant pressure sensor which was reading cap pressure at 22psi and occasionally overrunning to 23/24 psi on deceleration after a pull. It was not spiking. It has arp2000 head studs and a cometic gasket. As its been 18 years in service, I pulled the engine out and head off. Everything looks good but we obviously have an issue. Where I'm at.. Years ago I had the same issue, I checked the stud tension and they were all over the place. Some at 60 to 70 and some up near 90. I nipped them all to 100ft lbs and this stopped the water push until now. I believe this compromised the gasket back then. What do I do? 2 options are..  1) I bought arp 625+s, which I could put in with a new gasket. Thinking Kameari this time, reassemble and try again. 2) strip the block, get fire rings machined in with copper gasket and try that. I do not want to push it more than 28 to 30psi. I think the turbo will be out by then anyway. (G30-770). My other concern is the long term ability of a copper head gasket. Are they streetable for years? I feel like a new gasket with the new studs will probably suffice, but I don't know. Any thoughts welcome and advice on copper gaskets and fire rings. Thanks!
    • I'm a fan of the JZX110, and the Aristo. Big cruiser cars, and with the factory cars, super comfortable and feel like you're driving an armchair! And the JZ motors are a pretty nice engine too, especially with some basic mods.   The import process, and the need to be able to trust people, and the fact there's so many scammers around is what ever puts me off wanting to go through that ordeal!
    • I don't care for these at all, but at least the underside looks straight and not rusty. A good basis for a long life. Many cars from Japan have been lifted with forklifts and f**ked almost irrepairably.
    • Yes, but it's not dumb or dodgy. You can build a perfectly good boost controller from a pressure reg, a relief valve (looks same same as a reg if all from Norgren or SMC, for example) and a check valve. I ran one for years. Only superceded with  EBC because I could get one for cheaps and wanted finer control.   THis mod is certainly not a sketchy boost mod, provided the boost is kept below the "spin to death" threshold of the turbos.
×
×
  • Create New...