Jump to content
SAU Community

Recommended Posts

Well now the bad news the guys that installed it shorted out 2 of the amps and i had to send them to Melbourne and they havent come back yet!!! so everything is working apart from the subs (they told me this once i had paid and said lets start her up, my bad for not checking before i paid but you think they would have told me) anyway thats the story!!!

And yeah i thought it was overkill too but it was a present so i thought it might be a tad rude to put parts in and sell the rest or leave it sitting in the room!!! and yeah i know i shouldn't have posted it but thought i would show everyone how it came up like and most of my money went to a better alarm, and really if they want to steal it they will!!!! and i have insurance!!! lol okay i think i answered everything!!!

Thanks for the comments guys!!!!

say for instance...

post-1332-1128390868.jpg

I am entering the next autosalon.. under the 'it just works' category..

yes, i can do installs  B)  but I am pretty heavily booked with the quality of my work, so may not be able to fit you in.

niiiiiice. I like the way that you've used the box and some of the boot trim to wedge the box in there. I used the same technique on mine. Just rip up the boot trim and use it to jam that sub box in there. Also remember to disable the boot release so that if anyone ever actually pust anything in your boot and wants to get it out you have to stop the car and get out and give them the keys.

Also I found if you jam one of your old shirts into the sub box it greatly enhances the sound. Real sound deadening is far too expensive anyway.

I don't see the paranoia over the pix, as long as the number plate isn't shown ??? who's to say its not just any other black r32?

:lol: Was a little case of paranoia but yeah plates are not showing and there are that many 32's around!!! Back on now!!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
×
×
  • Create New...