Jump to content
SAU Community

Wtd: Std R33 Top Bearing Plates For Shocks/springs

R33RWKW

By R33RWKW,
in Wanted to Buy

 Share

Recommended Posts

R33RWKW Proficient

R33RWKW

Posted
Posted

Hi,

If anyone has any STD R33 GTS-T- Top Bearing Plates (strut tops) for the shocks/springs please let me know ASAP. I know that I will most likely have to buy the full strut, but if I have to, then I have to!

I have my car in the shop at the moment & I didn't realise (My fault I should have done proper checks beforehand) that my Tein HA suspension had the TEIN/aftermarket Top Bearing plates fitted.

The guys working on it are having major stress & need to get them so they can finish installing my Whiteline/Billes. full setup I bought the other day.

Victoria sellers prefered, but not essential.

Any help will be Great, as I need these ASAP

Cheers

Chris 0404323989 or (03) 97274276

  • 2 weeks later...
siksII Grand Master

siksII

Posted
Posted

hey mate, i had your exact problem and found them after several months or searching, but lately i have seen them for sale on ebay, so if you look there im sure thats pretty much the only place you will find them easily, i wish i had looked :O

R33RWKW Proficient

R33RWKW

Posted
  • Author
Posted
hey mate, i had your exact problem and found them after several months or searching, but lately i have seen them for sale on ebay, so if you look there im sure thats pretty much the only place you will find them easily, i wish i had looked :)

Thanks mate, I got some.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • dyl33
      VOLK RACING GTC CENTRE CAPS

      By dyl33 · Posted

      Centre caps $250
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Duncan
      Boost cut after swap(RB25DET NEO) R34

      By Duncan · Posted

      Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...