Jump to content
SAU Community

Recommended Posts

Ok so as most of you would know that the standard lights in the R32's are not that flash so i was thinking of getting some white night globes.

Now the high beam H3's are not a problem and got them in and a HUGE difference.

Now the low beam H3C's are a little harder as i can't find anyone that stocks them in Australia and if i buy them from JAPAN then it would be $180 to get a set delivered to me. Now i dont know about the rest of you but i thought this was a little steep for globes.

Now i had a couple of options.

1) install a set of driving lights. This is reasonable cheap option but did have its draw backs as well. Mainly being that cause of the intercooler piping it doesn't leave much room which means that the overall size of the DL would be under 600MM and not offer me much more light.

The other problem is the legal issue's and getting booked for DL's as most people do and dont really want the worries of something so stupid for a defect <_<

2) Find another set of globes that will offer me more visiblity at night making it easier to see and still maintain the original set up.

This proved a little harder than expected as the only H3C's i could find were stock replacement globes and would not offer me any more visibilty.

I couldn't find anything over 2000K and couldn't see the sence in paying $50 for stock globes which wouldn't improve visibilty.

3) Obvisouly a HID conversion is the best but very expensive and not what i want to do as i think its a bit excessive for what im looking for.

SO after lots of thought and studying of the globes and the stock head light set up i came up with another option which i think should work and cost about $50 in total for new low beam Blue Vision 4000K globes.

Still not 100% sure if it will and i'll keep all posted.

If anyone has upgraded there globes if you could post up or PM with where you got them that would be appreciated.

Cheers B

Link to comment
https://www.sau.com.au/forums/topic/92163-r32-head-lights-dull/
Share on other sites

i got my H3C globes from autobarn  $50

too easy

RellikZephyr

Stock globes im guessing.

Which is really a waste of time as my stock globes work fine, there just too dull and do not provide enough light.

Thats why i want to get some xenon or white lights globes instead.

Cheers B

yeah  pretty much stock globes

just the ultra blue ones or whatever they called

RellikZephyr

Ok you lost me a little there.

Stock globes are orange/yellow in colour and just the normal 12V 55W.

Meaning no blue tint at all <_<

What was the brand of the globes you got???

Cheers B

panasonic i think but i am just guessing

u know how u can buy like the aftermarket globes

blue ones cause they 50% brighter or whatever

yeah there the ones i got pretty sure they were called Ultra Blue

but i found most of my dull problem was cause i needed to adjust my projector globes

kinda hard to get to at back of light but makes a fair difference

understand?? was a while ago when i bought globes so its stretchin my memory

RellikZephyr

panasonic  i think    but i am just guessing

u know how u can buy like the aftermarket globes

blue ones  cause they 50% brighter or whatever

yeah  there the ones i got    pretty sure they were called Ultra Blue

but i found  most of my dull problem was cause i needed to adjust my projector globes

kinda hard to get to at back of light  but makes a fair difference

understand??  was a while ago when i bought globes  so its stretchin my memory

RellikZephyr

Oh ok.

Well as the globes are slightly different between the R32's and R33's the main problem i have had is that no one that i have talked to stocks or can get a hold of aftermarket H3C's blue vision 4000K or higher as there is not enough demand for them apparently.

Spoke with Phillips Australia and they wont bring them in, Narva do not have a globe bar the stock one.

there is no way im paying near $200 for globes from Japan :)

I'll figure something out.

Just sucks that im working night shift all week and i need my lights to get home :lol:

Cheers B

Phillips!!! there the ones i got!!

i remember now

so is ur car a 32 or 33??

i got 32 just asked at autobarn and they said here u go 50 bucks

strange that ur havin so much grief when mine was so easy

RellikZephyr

Phillips!!!  there the ones i got!!

i remember now

so is ur car a 32 or 33??

i got 32  just asked at autobarn  and they said here u go 50 bucks 

strange that ur havin so much grief  when mine was so easy

RellikZephyr

My car is R32 and they have standard replacement H3C replacement globes but like i already mentioned, i can't see anything with these, hence why i want brighter/white light globes.

Cheers B

well  if you have any luck  let me know

cause if they are brighter  i will go that too

brighter lights always a good thing

Good Luck

RellikZephyr

No problemo

what i have in mind is using H3 4000K Blue Vision and modifing them to suit.

Cheers B

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
×
×
  • Create New...