Jump to content
SAU Community

Recommended Posts

Have a set of 16" pair of rims.. brand is SEIN (not that it really matters).. No cracks or anything like that. Few minor scratches.

Suit burnouts, drift, or other fun activities :P

Currently has tyres nearly gone on there.. and will also throw in a pair of 205/55R16 Potenza Tyres.. with 20% or so even tread left (these came with my car - but wouldn't pass RWC so had to come off).

Not sure of the exact width, but they have 225/55R16's on there at the moment, so will take up to about that size.

Now only asking $50 for the lot.. -

*** SOLD ***

Pickup only on the goldcoast.

post-1332-1131330304.jpg

They are 5x114.3 - suit a skyline or anything that skyline rims fit. I've used them on my R32 a few times. I think they are 7" width, but I'll have to check to confirm.

They're some sort of aftermarket rim.. just only have the pair, as bought off somebody else.

There are a few minor scratches and gutter marks (as stated up top), they're really for drifting, drag, or the like where looks aren't so important and you don't want to destroy your fancy rims. Then again, they don't look terrible on the car either.

  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
    • The annoying part about neglect, is when you start to replace one thing, and find ten more broken things. Ham fisted monkey repairs you normally only find out about when trying to do something unrelated! Ha ha   Neglect you can kind of anticipate the huge costs to fix it all. Ham fistedness is normally a shock the first time your work on a new old car, as everything "looked" good before.
    • For DBA, check out their guide table here. https://dba.com.au/wp-content/uploads/2023/01/Direct_Replacement-Guide-2021.2.pdf   Additionally they have some other guides and info on how to make sure you choose the right pad.
×
×
  • Create New...