Jump to content
SAU Community

R34 Standard Cd/tv

Daniel_

By Daniel_,
in Car Audio & Electrical

 Share

Recommended Posts

Daniel_ Enthusiast

Daniel_

Posted
Posted (edited)

Having major problems with the standard TV/CD.

The cd player just keeps trying to read cds and never does anything else.

I can't even eject the cd.

Last week I got it to work by taking it all apart and removing the power connector, putting it back and hitting eject at the same time...out came the cd which has the nav data on it.

Put in a normal cd and it played fine and the tv would pop up and everything...until I turned off the car and then it went back to reading the cd over and over again and the tv controls won't respond.

This week tried the same thing I got it to eject but it wouldn't read when I put it back in and then won't eject again using the same trick.

Tried cleaning the lens but hasn't done anything :D

Has anyone had a similar problem and found a way to fix it?

I thought i might be pressing the wrong buttons (most in japanese) but I doubt it's that.

Edit:

With the car turned off the cd continues to spin, don't know for how long but I left it for about 30 mins and was still doing it.

Edited by Daniel_
Link to comment
https://www.sau.com.au/forums/topic/93767-r34-standard-cdtv/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Chupapy
      Coolant leak?

      By Chupapy · Posted

      Is it alright to top up with just another green coolant?
    • Songo
      New kid on the block

      By Songo · Posted

      thanks GTSboy. My confusion at the moment is i am trying to locate the ignition, ECU battery power and the ECU negative The closest thing i can find is the for the S15 on Page 8 of the Wiring Specialties web page https://drive.google.com/file/d/0B9F33_M_GgENQnZ6STMxVmVNd1E/view?resourcekey=0-eZ4nNRwRoqa1qvKlWWHm8A I cannot find the same diagram for the R33 RB25DET Series 2 dash plug pin out.... Do you know what the Pins? or know where i can find the same pinout diagram for the RB dash plug? Thanks for the advice on the box... i like a 6 speed so might be on the lookout or the box now.. a topic of discussion for another post...
    • Chupapy
      Coolant leak?

      By Chupapy · Posted

      Will have a look at that. I cant see any leaks 
    • GTSBoy
      Coolant leak?

      By GTSBoy · Posted

      Put another overflow bottle (ie, a 1.25 coke bottle or similar) under the overflow hose and see if it is being pushed out there or if it is disappearing into the engine.
    • GTSBoy
      New kid on the block

      By GTSBoy · Posted

      Staring on a stand is no issue. You just have to wire everything up, give it fuel and cross your fingers that the stand is robust enough. Arranging the inlet plumbing is often the hardest part, without any surrounding structure to hand some of it from. No need for coolant if you only want to run it for <1 minute. As to the gearbox - I think the little Aisin box is a bit stronger than the other small Nissan boxes that went behind SRs, but I wouldn't be too keen to test its limits with the torque of a boosted 25. I don't know if you can retain the box and the tailshaft. The box won't connect to the RB without an adapter of some sort, which is either a plate that will push the engine forward (which is not good for fitting it into the bay's available space) or push the box back, which messes with the box position and tailshaft length - OR - cut and shut work on the bellhousing, which is a long way from "least modification". I'd be buying a new 370Z 6 speed or similar, doing what has to be done to that to make it fit RB (ie, cut and shut bellhousing) and the requisite tailshaft custom/mods.
×
×
  • Create New...