Jump to content
SAU Community

Recommended Posts

Hi Guys,

I've just taken delivery of my r33. Am really impressed with it, good step up from my previous 180sx.

One thing tho, seems like it had an aftermarket steering wheel on it before and someone replaced it with a std airbag one.

My question to anyone that can answer it is, i'm gonna replace the wheel, how do i take it off. And take it off without the airbag discharging (if one exists in there). Any help would be appreciated.

Nav

Link to comment
https://www.sau.com.au/forums/topic/9558-replace-std-air-bag-wheel/
Share on other sites

i know u have to do somehing like disconnect the battery and leave it for 30min to uncharge the system...

one thing u need to check though is that if the airbag is meant to b there? cos i think a lot of 33s have them standard, unless they r the real early ones, and its illegal to take them off....big fines and jail can b involved in some extreme cases like accidents causing fatalities

might b better to get some 1 else to do it, it will b hard to find some1 due to this law but at least u cover ya own ass, let me know cos i dont like mine ither :D

I just removed my wheel. You need to find someone that car remove the star bolt that holds the airbag on. That is the hardest thing.

You don't have to leave the car stand for 30 minutes as the capacitor is located in the steering column so as soon as you unplug the airbag, you can remove it.

i know it can only kill ya self, but if someone (especially a business) removes it they r liable, thats y they have the penalties..if u crash and die, it is blamed on them cos the airbag "could" have saved ya life..so they get a $10000 fine and jail time....u cant remove safety features legally..unless u somehow manage to do it with an engineers certificate..but youds still struggle

Series 1 is ok as airbag is optional and could or not come on your particular car so how are they going to tell. Series 2 airbag is standard so if its a series 2, yep, you'd being making in unroadworthy.

Its kinda the cross over years anyway 92-95 where they became common... but its not like they'd have a big list of import specs and what they did and didn't come with as standard (other than the obvious).

yeh it could b, should find out

when u bought the car u must have been unlucky in that thay didnt spot it, fingers crossed they dont find it when u sell otherwise youl get hit up to put it in otherwise it wonr b road worthy..and i think thy r around 1k so it aint cheap...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...