Jump to content
SAU Community

Recommended Posts

Hey,

Im in the market for a 34 and just wanted to know when inspecting one what to look out for.

I currently have a 32, if I was to buy another one or help a mate look for one there are certain things I would look out for. Varing from cosmetic, interior and mechanical due to the nature of the specific car.

Once you own a certain car you notice and learn certain parts about them that start to deteriorate etc.....

While knock on wood that you haven't, would just like to know from you guys, if theres anything, even if little.

Thanks in advance.

Link to comment
https://www.sau.com.au/forums/topic/97953-calling-on-34-owners/
Share on other sites

Had mine since almost new, now done 42K and as the above post says, it's time to replace the coil packs. Will be replacing mine with Splitfires. Other than that, generally a pretty good vehicle if they are maintained well. As most Skyline owners will tell you. Keep to regular service schedules an you won't have any problems. The coil packs are the first thing (other than blown bulbs) I had play up.

Cheers

Muz

mines done 60k+ only had the 02 sensor replaced, *touch wood* coil packs are still in good order. I get awesome mileage which is a bonus for a skyline owner. Apart from that try and find a stock example with low kays and you should be alright.

Ive had mine about 10 months now, in that time the list of dramas has been as such;

- Shorts killing tail lights (3 of them, before the dealer finally fixed the short)

- Leaking master brake cylinder

- Leaking shocks

- Siezed turbo

Apart from that she's been great, and I do push her pretty hard on occasion, so the more serious of above repairs isn't too surprising I guess. Most of my friends who I take for a ride comment on how much like a brand new car it is, despite 8yrs old now, so as mentioned above, stick to regular service intervals, and you should be pretty right.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
×
×
  • Create New...