LiQuid IcE

SCAMMER (or he fell off the face of the planet) anyone been shafted like me and got any ideas how to get money back??? I have his bank account details and his phone number...

anyone know how to get in touch with this guy? Deposited money for the injectors over a week ago and haven't heard from him since!! Phones off as well.

If the alternator is working then a multimeter will read 14V+ through a multimeter

Don't forget to undo the plug for the light

Items: 550CC+ Injectors. Must be Direct replacement for R33 Series 2 RB25DET Extra Info: Side Fed High impedance Must be direct drop in Support 300rwkw Connectors and collars Contact Details: Contact via PM Price and price conditions: Budgets around $500

you need an extension between your ratchet and your socket

yup they'll fit fine

I work at Repco so ordered a bunch of these together to save on freight from the supplier, thinking I'd use them eventually. (We have a family of skylines, stageas and silvias) They're all Permaseal MLS-R gaskets. Visit their site for info. If you go to the website above it gives you the specs on each gasket. Just want to get rid of them to pay some bills. I only have what I have listed below. Click the link to see what comes in the kit. All the inlets and outlets are either 5 layer stainless steel or stainless with graphite core.. RB25/RB20 Gasket Kit $40 Have 1 of these but need to confirm my dad hasn't stolen any of the gaskets out of it. RB26 Gasket Kit $45 Have 3 of these. Need 2 per car. RB30ET Gasket Kit $30 Have 4 of these The following are single gaskets. T3 Inlet (Rb engines except 26?) T25 Inlet (Sr20, Ca18 etc) Have 5 of each. $15 Rb25/20 and Silvia Dump pipe (outlet) gaskets $25 Pick Up from Endeavour Hills, Vic Or Postage will prob cost $5 to 10 depending. Will swap for tropical fish for my new tank!

I'm in too, depending on price. So will this be a changeover kinda deal with my stock headlights? coz the brackets and housing on my stockies are shagged that's why I'm interested in these.

Since the S2 R33 only has 1 ground wire coming out, can i solder both the Signal ground, and the 12V ground, to the one ground?

edit. nevermind.

Take it to most competent Body kit shops and they will do it for you. expect it to cost heaps though. this link is a good DIY: http://www.skylinesaustralia.com/forums/Stagea-t311013.html

your insurance doesn't have to know about it, and they won't do anything for you anyway Call the taxi driver. He needs to put a claim through his insurance. Get the name of his insurance company and his claim number and you can deal with the insurance company from there on. If he refuses to put a claim through then you'll have to fix the damage and sue him for what it costs you. The laws pretty clear, person from behind is at fault. Alternatively if he doesnt want to go through insurance but would like to pay for the damage , then get some quotes and sort it out between the two of you

also add head bolt set to that, forgot the price off the top of my head

We just did all the work our self and this is what it cost us approx. (on an rb25det stagea) 200 for the full engine gasket set (OEM, off a forum member, expect to pay an extra 100, think eBay USA was the cheapest, its almost the same price to buy just the gasket, then you need to get stem seals and stuff separately anyway so buy the set.) 600 for the work on the head (a couple of water jackets welded, 24 stem seals = $$$) (place in Dandy. should cost much less if your head is in good condition, or more if its cracked, ours wasn't cracked.) we did timing belt kit/waterpump/thermostat so that was another 200-300 and replaced all the rubber valve cover washers so there was an extra 100 to 200 there coz could only find it through the dealer. also replaced some water hoses, also through the dealer.. think I was quoted like 500 or 600 for labour if I was to get it done from someone else.

http://www.skylinesaustralia.com/forums/Fr...06#entry5296406

thank! I'l keep them in mind for my car, already bought a gates kit for the stag

thanks guys. The link helped. I need to find the RB25 one or one with a slot then. Cant elongate the hole coz of the way the bend is on my one. Thanks!

I'm replacing the water pump timing belt etc. It's a 1996 series 1 Stagea RB25DET Ordered a WP898 because that's what the supplier (Nason's) said it used on the RB25DET. Said it was the same as the RB30... When going to install it, All the big bolts lined up. But the 6mm bolt (small one) is about 7mm off. Anyone know if the stagea water pump is different? Even an ebay search says the Rb25 takes the same pump as Rb30 i looked at Nasons online catalogue and looks like the R34 takes a WP900... so might order that one ans see how we go. Can anyone Save me some time and tell me the correct GMB or TruFlow part number? They should be the same. Can I keep the WP898 for my R33 since I'll be doing that next? Attached some pics so you can see what I mean thanks

all r34 bars are the same. wasnt aware there were different series. r33 s2 bar will fit on but it wont line up with the headlights. around the guards will be fine. you have to change headlights, re0 bar and bonnet if you want to do it properly

hmm yeh that's what i'm looking for, but there's only 4 hoses? if it looked more like the gtr kit that same seller has (14 hoses) id get it thanks!

Anyone know where to get an engine hose kit for an RB25DET? I don't mean the radiator hoses, but all the little water/oil hoses connecting to the engine. Noticed while replacing my head gasket that all the hoses are rock hard. Do any sellers do them in a set? Any help appreciated.

pm sent

I believe the link you posted is actually by one of the SAU traders. Maybe PM him on here and see if he can help you out on price also found this... http://www.skylinesaustralia.com/forums/Bl...er-t319994.html

Looks awesome. is there a step by step tutorial on how to do this? Wanna make one?