osiris23

Make an offer. Price is negotiable.

anyone interested?

Hey i just bought another car so my project is going to have to go as there is not enough room at my place for my this car, my new car, and my work car, so unfortunatly one has to go. (plus id like to pay off some of my loan ) Ok here it is: 1992 S13 Silvia - RB20DET Conversion (Engineered) (Timing Belt Has Been Changed) - Topmount Manifold - T70 Turbo - Braided Oil Feed Lines - 38mm External Wastegate - 3" Turbo Back Exhaust - Silicone Intake Pipe - Simota POD Filter - Custom Plenium Chamber (Front Mounted Throttle Body) - 600X300X80 Front Mount Intercooler - Custom Intercooler Pipeing - Trial Blow Off Valve - Fuel Pressure Regulator - Bosch 040 Fuel Pump (about a month old) - Oil Catch Can - Button Clutch - Koni Adjustable Shocks - Adora Lowered Spring - Slotted Front Brake Rotors - Locked Diff - Widebody Gaurds front and rear (front gaurds are vented) - Custom Respray (blue with purple pearl, black bonnet and mirros) - Bonnet Pins - Alarm and Immobeliser. Has remote start, LCD keyring pager, shock sensor etc. - Smoked Series Gauges in pillar pod (Water Temp & Oil Temp) - Boost gauge mounted on dash in cup, plus an extra cup which was for oil pressure but my gauge broke. The back seat has been removed and fully carpeted set up for a sub install. Does how ever come with the back seat and everything else. The car also comes with standard shocks and springs etc plus extra stuff i have laying around the place like the standard front gaurds etc. Also comes with left over paint + the paint code. Other parts which will ALSO COME WITH THE CAR are: - RB20DET bottom end, Bored out for 50thou oversized forgies. Has crank and sump + extra bits. - Shot peened rods - Copper head gasket - Vertex Side Skirts Runs perfectly, starts first go every go, doesnt miss a beat. Serviced every 5000K with MOTUL Turbolight. Has Long rego. About 10 or 11 months or so. Im sure there is probably stuff i have left out but if your interested come have a look for your self. If your interested give me a call on 0402 756 302 or email me [email protected] Price $9500.

I am selling my MY99 WRX. Features Power Windows, Anti Lock Brakes, SRS Driver and Passanger Air Bags, Power Steering, Power Windows, Air Con, Remote Central Locking. 120,000Ks with full up to date log book/service history. Full recipts for just about everything including services, tune ups, parts etc. Factory Leather Trim MRT Intercooler Water Squiters Custom CAI From Front Bar MRT Turbo Back Exhaust HI-TECH Muffler Turbosmart Duel State Boost Controller Turbo XS Plumb Back Blow Off Valve, Also Have An Atmopheric/Plumb Back Hybrid Heavy Duty Clutch Anti-Lift Bush Kit Semi Metalic Brake Pads (New pads at front) Front Slotted Brake Rotors Semi Slick Tyres (street legal) Blitz FATT Turbo Timer Autometer Phantom Boost Gauge Quik trak Alarm / Imobliser (satalite tracking system) Sony Double Din Head Unit with 10CD Stacker in boot Kenwood 6X9s and unknown speakers in the front (never taken off the door trim but they are not factory) The sound is VERY good, Clear, with lots of bass. Tinted Windows New Battery (12 Months Warrenty) This is a very nice car and a pleasure to drive. Reason for sale is i want to pay off the remainder of my loan and start putting together a deposit for a house. I have recipts for just about everything done to the car from aftermarket modifications to all mechanical work carried out including services. 100,000K service has been done. Up to date log books. NEW PHOTOS 22/10/06

i was actually thinking of trying to draw it in photoshop but dont think it would quite look as good. thanks for the advice anyway i might try to get onto the distributors.

As the title says can anyone help me out with a hi resolution ORIGIN logo with the rabbit? Thanks

Heres my R33 which is recently sold. Wish i didnt now though

i just remembered someone who was looking at the car rekons it has an larger throttle body on it. i have no idea my self though.

Not sure mate. the car was my friend car and he did all the engine work. Sorry i cant be much more help.

full boost 5000-5500. hits hard when it comes in

Someone buy this and finish what i started. Fullkit, fat wheels under it, aftermarket computer and injectors and you'll have a leather combination. If your interested in coming and having a look at the car im located at Ulladulla which is on the NSW South Coast about 2½ hours from sydney.

Price Reduction - $12,500 As said it has lots of extra RB20 parts included such as the bottom end which has been bored out and used to run 50thou oversized forgies. also got the copper head gasket, Got a turbo timer and performance meter which goes with it as well. Brand new guages in the cabin, 2 sets of front wide gaurds, vertex side skirts, plus heaps more extras i have like extra tie rod ends, control arms etc etc. If your interested give me a call 0402 756 302.

Engine bay shots.

1992 Nissan Silvia. 90,000 on clock. 8X,XXX on motor when it was put in. 12 Months NSW Rego. Engine - RB20DET Conversion - Engineered - Top Mount Manifold - T70 Turbo - 38mm External Waste Gate - 3" Turbo Back Exhaust - Blow Off Valve - Front Mount Intercooler - Custom Intercooler Pipe Work - Custom Plenium - Silicone Intake Pipe - NEW Simota Pod Filter - NEW Bosch 040 Fuel Pump (less then a month old) - Adjustable Fuel Pressure Regulator - NEW Oil Catch Can Drive Line - Twin Plate Button Clutch - Slotted Front Rotors - New Brake Pads - Koni Adjustable Shocks (Dampner Adjustable) - Adora Lowered Springs - C.I.G. Locked Diff Looks - Full Wide Body Guards Rear and Vented Front - Full Custom Respray in Custom made blue with Lylac pearl (Door Sills etc are done) - Black bonnet and Mirrors - Bonnet Pins - Groove 5 Spoke Wheels With Very Good Tyres - Back Seat Removed and Sub Install Inplace (All Carpeted) - NEW Smoke Face Gauges In Twin Pillar Pod (Water Temp, Oil Temp) - NEW Boost and Oil Pressure Guages In Cups On Dash - Pioneer CD Player - Sony Xplod Splits The car also features an Alarm with a key ring pager and also features Remote Engine Start. The Car also comes with 2 new Vertex Side Skirts and 2 new Wide vented front gaurds, Plus quite alot of RB20 extra parts like a bottom end which was bored out for 50thou oversized forgies, Copper Head gasket, Shot Peened Rods, 2nd power steering pump, 2nd sump, rocker covers, plus lots more. I have lots more stuff i will chuck in as well if the buyer is interested which is just laying around the garage. Also comes with all items removed such as back seat and seat belts, Removed trimmings, Standard shocks and springs, plus alot more. $12,500. For anyone who is interested get in contact with me: By Calling - 0402 756 302 By Emailing - [email protected]

Yer ive heard about putting steel wool into the catch can. it might be a bit hard with mine as the only real opening would be the drain hole down the bottom. Ill see how much i can shove into it though. Cheers

I actually didnt do it the tell you the truth. I can take some closer photos if you want and can send them to you. PM me if you do. Cheers

cool cheers mate

where i have it plumbed into the inlet if it is correct i an going to make a little flange piece to come out of the silicone pipe.

Hey. Just a quick question about installing the catch can on my RB20det. I have a aftermarket turbo and top mount manifold and the usual line which people plumb into is no longer. Heres a quick picture of what i propose to do. Is it correct? Is it the right breather to go off. Reason i went this one is it has had nothing on it at all since the new intake and everything had been on. What do yous think?

awsome. Thanks alot.

i am on nissansilvia but for some reason my account has been suspended?? no idea why coz i havent done anything bad on there :?

Hey guys. Looking at getting a new toy this weekend for a new project. Probs getting an S13 silvia which is currently a CA18. I found a SR black top for sale but has no gear box. As a temp fix would a CA18 gear box bolt up to a SR20 untill i found a SR gear box at the right price? How much would a SR gear box be roughly? Be great if people can help. Cheers

These will fit an R33 GTST but will need wheel spaces on the front. A little to close to the caliper on mine as i remember.

if someone is interested in the plates make me an offer. If someone is serious give me $300 and there all yours. 0402 756 302

bump