mr 32

thanks Sam pm sent with my email thanks again

in with 4 steveo, payment desciption is texi mr 32 plus 3 all forms on the way

nice photos sam any chance of getting hi res copy of mine?

has anyone used the whiteline Swaybar spherical rod ends? just getting an idea if they are worth changing or just use noltahne bushes for the standard set up?

see what the idle when the engine is up to temp you can adjust the idle with the idle screw on the stock computer

whats the idle when it is hot? is it running a stock computer?

any interior pics?

rb26 argos are 568 grams each and rated at 250hp per cylinder

are you getting dose when you change gears?

the only vid online at the moment is on youtube seach sau nsw drag day mr 32. these blow off valves are farken loud, you will here them when they open. this is under the plenum you can see the line marked BOV it goes to a nipple next to the intercooler hose you can just see the nipple here to the right of the inthercooler pipe opening the other side joins the nipple and goes to the bovs just make sure you check the air filters for the bovs aswell

form faxed & money sent

i have the same set and never had a problem with them on stock boost are there any spilts in the vac hose going to them? dont forget to check the feed coming fromt he engine bay from under the plenum there might be a chance they are rusted shut, give them a good clean dont use wd40 as it will eat the rubber gaskets

drag day

does anyone know what would be the standard working pressure in the cooling system? or how much pressure the copper water line above the turbos would see? cheers

haha its always the way isnt it i had a quick look in the workshop manaul but couldnt find it looks like it is a dash out job wounder what my chances are of cleaning the rust out of it p.s ramps have been sarted on just need someone here with some spare time to put them together

has anyone changed a heater core in an r32?

big thanks to everyone who organised and ran the day it was a great day I would like to thank everyone that stayed late to help me load the car onto the trailer and duncan and kel for letting me borrow the trailer

hey guys can i please get this vin checked ER34003563

any ideas where this might be?

set them up by turning them on with nothing attached letting them stop in there stop postion, then reinstalling the wiper arms but it makes no diffrence

need some help with wiper motor/wiper stop position car is r32 gtr i had the wiper motor removed for paint since reinstalling the auto stop position has changed it now stops 30-40mm up from where it should, when wipers are turned on they travel down then back as normal. ive checked the motor twice now and the dog leg is on key way so can only go on one way. adjust the motor by hand makes no diffrence as it goes back to the auto stop point when plugged back in any ideas?

Defi oil temp sold still for sale Nismo dump pipes $600 including shipping by express post stock r32 gtr radiator $10 pick up RB26DETT sump $200 including shipping Nismo RS580 turbos suits all gtrs $1800 including shipping Aftermaket fron pipe came with hks hi power silent exhuast $150 including shipping turbos and dump pipes together for $2200 including shipping thanks steveo

still for sale

looking good