Jump to content
SAU Community

frakzz

Members
 View Profile  See their activity

  • Posts

    66

  • Joined

  • Last visited

  • Feedback

    0%

 Content Type 

Everything posted by frakzz

  1. frakzz
    Which shafts are better?
  2. frakzz
    in the winter I will do porting, adjust the split gears, will put 272 shafts, then go to dyno
  3. frakzz
    3500 rpm begins to feel boost 2510 gtx28
  4. frakzz
    presetting aem sard 800cc 1.7 = inj duty 64% (hks 2510) 1bar (34%) 1.2 = inj duty 80% (gtx2860) 1bar (45%) gtx2860 2500 0.22 3000 0.36 3500 0.56 4000 0.76 4500 0.9 5000 1.07 5500 1.15 5600 1.2 6000 1.2 6000 1.26 hks 2510 2800 0.3 3400 0.5 4000 0.7 4500 1 5300 1.5 6100 1.7 slightly larger lag on sensations Need a slit gear that reduces the lag advance intake and exhaust => more low-RPM power, less high-RPM power
  5. frakzz
    said they need to run over 1000 km without boost
  6. frakzz
    taaaadaaaaa
  7. frakzz
    See the result next week after setting aem
  8. frakzz
    his change only compressor wheel to 2863, i change all enternals (CHRA) he did not increase the back, it turned out that there is a bottleneck he changed only the compressor wheel, and I changed all the insides and grind the turbine house (replace to GTXCHRA 2860) 2860 wheel less than 2863 HKS GT2510 COMPRESSOR: -Wheel- 63 Trim - 47.7 Inducer / 60.1 Major -Housing- 60 Inlet / 50 Outlet - 0.60 A/R TURBINE: -Wheel- 62 Trim - 53.0 Major / 41.7 Exducer -Housing- GT25 inlet / Internal GT25 oulet - 0.64 A/R GTX2860R Compressor Wheel: 45.7 / 60 mm / Trim 58 (GTX 11+0 Blade billet Wheel / Extend tapered tip) Turbine Wheel: 47.0 mm / 53.8 mm / Trim 76
  9. frakzz
    I will take the risk rebuld my hks GT2510 to GTX2860R
  10. frakzz
    thx for idea ) tuning my hks GT2510 to garrett GTX2860 Can anyone help me? is this map correct? 264cams 2.6
  11. frakzz
    at what rpms gtx2863s go to 0 and when to go 1kg? rb26 264 cams How do they spool when compared to -5
  12. frakzz
    Rb26dett gtt r34. Sorry for my bad eng. My rebuilted turbos 2510 worked well for 3 yeas, quick spool 3000 1kg, max boost 1.8. but unfortunately in them something was horrible and damaged the wheels. Then I decided rebuild they and to increase the rear end of the turbine to 2530. But 2530 is a very old turbine and I decided to look at the catalog garrett to search of a new turbine and came across a GTX2863. I want to take the chra (cartridge) of GTX2863 and put it in the hks body while increasing the rear of the turbine and compressor housing. but on the calculator comes out a very lagly so it is. or it is better to stop at 2530. There where do the turbines said that after boring the rear and the front hull hks differ from GTX and will not be. They said that it would give an exact copy of the turbine GTX2863. In Russia, this is the only company that manufactures qualitatively turbines on a double-saw saddle-bearing. Then spool up original twin gtx2863 on rb26?
  13. frakzz
    hello correctly I have understood that djvoodoo has changed only a compressor wheel and turbine wheel stay 25? i want rebuld my hks 2510 to gtx2863 (compressor 47-63, turbine 47-54) is this good idea? when is spool up with twin 2863? or may be rebuilt to 2530? 264 cams thx
×
×
  • Create New...