GTR_Legend

Sold...pending payment Thanks for the interest guys...will advise if becomes available again Im really sad to think that its going

All, Located in West Sydney NSW. SMS Michael - 0400408839 Owned this since approx. 76000km Serviced every 5000k Sat in the garage since mid 2011 96 S2 White 555 Nismo injectors Z32 AFM GT3076R turbo 3" downpipe Greddy RS plumback BOV Excedy HD clutch Blitz type POD Alloy Air box FMIC Walbro pump Braided Brake Lines Ferodo DS2500 front pads Bendix ultimate rear pads DBA Front 4000 rotors HICAS lock bar Greddy Type B Boost controller HKS turbo timer Brant Alarm with key pad Sparco 17" racing rims front/rear strut braces Cusco brake stopper Sunroof approx. 215,000km on the clock Needs some work if your looking to rego as it has none. Probably more so suit someone looking for a project car No speakers, no radio antenna, no Stereo. No cat-back exhaust (but you can take the one I pulled off if you wish, has had it) Brakes a little low from memory Rear tyres low (federal 595 evo) Clutch slips Some damage to drivers side door/rear qtr Car is still running on STD ECU, it starts but I wouldn't drive it. Did have a powerFC back in the day, dyno'd at 256rwkw on 15psi Apart from the above its probably just general wear and tear but overall the car was looked after pretty well $3800

Hi guys, got your pm's...will check the parts and advise tonight

All, Have the following for sale. Located West Sydney. Few car/engine/electrical parts besides interior. Pls pm or txt 0400408839, will get back to you when possible. Some interior parts i may have missed...so feel free to ask. Open to offers on some items... Majority of below, especially interior parts are in good to excelent condition. Non Interior Parts: Factory turbo heatshield - $5 Used starter motor – working - $40 Factory jack & tools (tools little rusty) also boot mount for jack $5 Factory weather shields – One or 2 clips missing but still mountable $70 Factory R33 GTST S2 manual ECU - $80 Hyperflow oil catch can, 3 port polished – never used (has internal filter) $150 6x Factory injectors – few pinicles broken but working - $50 Standard fuel pump – used, no sock (have spare new walbro sock lying around, not sure if it fits) $15 STD Space Saver Tyre/RIM - Few rust marks from sitting in water should scrub off…looks to be never used - $20 Razin voltage stabiliser - $15 Interior Parts: Factory Skyline floor mats $80 Under bonnet lining - $10 Under boot lining - $10 Plastic boot mould $5 Rear Boot parcel - $5 Front boot parcel - $5 L&R boot parcel - $10 pair Inside rear interior handles - $5 pair Rear parcel shelf - $15 L&R rear lower interior - $30 pair L&R rear seatbelts $40 pair Rear seat - $50 Other parts available shortly - Ask if interested, can arrange it faster Front L&R seats Front L&R Seat Belts Centre console Dash centre surround Steering Wheel with Airbag Dash with Airbag Climate control unit Sony CD player 52w 2x Sony 6" 3 ways Speedometer (216,000km) Roof lining Sunroof

SOLD

All, For sale is a power FC with hand controller from my R33 GTST S2 Brought it new from JustJap a few years back. Currently tuned with following mods, 250kw, 555cc injectors, Z32 AFM, GT3071R turbo running 15psi and the usual other mods. Obviously you should get it re-tuned for your car. Will not separate. Located in West Sydney $800 Will post at buyers expense Txt 0400408839 or PM

PM Sent

All, Looking for a 2nd hand, good condition cat back exhaust...located in sydney, let me know what you have! Do not need the cat... pm or txt 0400408839

Is Operating temp issue why your replacing the coils? in my own experience, car stopping at operating temp was just to the CAS. Had this issue so many times on my VL's. Replaced my coils in my skyline when it started misfiring when on boost.

Mate, any pics, km on engine & car and list of mods? cheers,

Guys, Require the following items, Had a Honda driver pull a kamikaze on me and try to turn left from the middle lane of Parramatta road as i was driving past in the left lane Need a driver’s side door and front quarter for R33 S2 GTST in White (prefer original paint job in good condition, not looking to respray) Located in Sydney, happy for interstate offers. Do not require the interior of the door, but happy to take it if it comes with the door SMS 0400408839 or PM

any colour pics of engine bay? also any brake upgrades? electronic boost controller? ps. looks like the car that past me once on homebush bay drive fair few months back...if so, i can vouch for the awesome sound!

pics? 100K service?

i see this car too sometimes on homebush bay drv

thanks guys the work was done months ago, and i couldn’t really be farked going back there. if you want something done properly you need to do it yourself. the rubber hose connects to the chassis. i dont really think it makes a difference if its connected or not. does anyone know if the 3 way connector is fully open each end, or has a one way flow? i have a spare t-piece and hose i could use.

Sweet as R34 GTR Nur. heading west on M4. recall the plates were NURGTR

G'day Guys, While back now i had a full service done on my car, installed new turbo etc... at a workshop Servicing my car tonight and find that a hose is not connected . Car is an R33 GTST S2, near the air filter. Firstly, is the bottom of the charcoal canister supposed to be connected to anything? if so what? (pic 1) Secondly, You will see in pic 2 there is a steel tube not connected to anything. this seems to go under the firewall. on the left is the hose which i think it connects to. this hose just connects to the side of the chassis any help would be appreciated.

Nissan, UAS or just jap should be able to provide

good price at this point in time my rears lasted 6 months...i wonder why! my fronts are still going but i am looking to replace shortly only unsure comment i have about them is i have vibration in the fronts. from what i can see it looks like every second inner block has worn a little lower than others and this is the vibration i am feeling. not sure on the camber setup...but advised the mech for a street setup so dont believe it would be too aggressive

Guys, DIY is courtesy of rexnet - BMH Brant Alarm - Car wont Start/cut out For months now i have been having an issue where my car wont start without giving the steering wheel a hard bash, mostly on a hot day or after driving my car. I discovered a few days ago if i lightly tap the lower part of the drivers side dash the car starts. This was near the incabin fuse box. After further investigation and tapping everything under the dash to determine the issue, it was my Brant Alarm. Done a google and came across the above. I have resoldered as per the DIY and my issue is resolved. Hope this may help others and may relate to other alarms also.

pm sent

bump

bump

bump

afm sold