CEF33Y

I went 33 box instead so selling the 32.

PM'D

SMS'D

Sorry mate, alternator not for sale

I'm in nowra Nsw, ph is 0400257530. Reasonably Neg on prices too.

mods please delete two duplicate posts, dont know what happened!

Mods please delete the two duplicate posts? dont know what happened!

Hey Guys, got a 5 speed gearbox out of a r32 for sale as a conversion. Includes Gearbox (out of a stock 140k r32) with shifter, speedo sender, mount, crossmember, throw out fork and bearing. Shifts feel good. Tailshaft Pedals (clutch and brake) Slave, master cyl, and lines. No flywheel or clutch. $500 Or can do box on its own for $350. Also have two sets of castor rods, 1st are a stock pair (off r32) bushes have slight cracking $50 Second set Have aftermarket Nolathane bushes (out of a cefiro, same as 32) $120 Have complete brakes off 32, slotted discs on front, almost new pads all round. $300 for front discs/calipers/pads $200 for rear discs/calipers/pads Or $600 with all lines, rear 5 stud hubs and knuckles, full handbrake setup with cables Front lower arms, ball joints have torn boots, both are straight, its a pretty bad photo. $100 pair

Hey Guys, got a 5 speed gearbox out of a r32 for sale as a conversion. Includes Gearbox (out of a stock 140k r32) with speedo sender, mount, crossmember, throw out fork and bearing. Shifts feel good. Tailshaft Pedals (clutch and brake) Slave, master cyl, and lines. No flywheel or clutch. $500 Or can do box on its own for $350. Also have two sets of castor rods, 1st are a stock pair (off r32) bushes have slight cracking $50 Second set Have aftermarket Nolathane bushes (out of a cefiro, same as 32) $120 Have complete brakes off 32, slotted discs on front, almost new pads all round. $300 for front discs/calipers/pads $200 for rear discs/calipers/pads Or $600 with all lines, rear 5 stud hubs and knuckles, full handbrake setup with cables Front lower arms, ball joints have torn boots, both are straight, its a pretty bad photo. $100 pair

SOLD

Hey guys got this s13 for sale. Its ca18det, auto, Two tone, factory aero kit, kit near on mint, front bar has vents, few light scrapes under front bar. Arc side mount cooler Pod filter, Heads up display. 130,000km Most of interior has been changed to gray, except for dash. No stereo. Has full alarm/ immobiliser with auto up windows. Looks to have sr20det brakes 16 by 7 1/2, offset of 37. 225 tires. Will be sold with r32 front seats. Rego till october this year Car has some issues, it has a bit of rust around the sunroof, between door hinges, clear coat is peeling on bonnet, and boot (as can be seen in pics) has had a spoiler at some stage, still has holes. Car isnt running too well at the moment, maybe afm issue, starts and idles ok. Will try another afm soon see if thats it $2700 Located in Nowra, NSW Pm or 0400257530

That's prob cause the vents are sold, see previous posts. Update: Can sell gearbox as a manual conversion, with tail shaft, pedals, clutch master, slave and lines, for $500. All that's needed is flywheel and clutch.

Price drop on shell, need it gone, 1000 ono. as it sits, no motor, box, loom or ecu, missing vents inside.

Pms sent, getting through sms

Parcel tray is stuffed, been hacked out. Will reply to all pms soon, flat out at work

Center and left vent gone. Stereo surround pending, no starter motor or intercooler pipes. Still have bov yes. What's the 'sill between door and door card' ?

Gearbox now for sale, $400 Rear lights $50 each rear bar $100 Boot lid with stock wing $100 doors, complete with glass, trims, mirrors, switches $100 each Stock front seats in immaculate condition $150 pair rear seats in immaculate condition $100 Left hand headlight $50 Wheels in pic, 16's, with 225 50 16s yet to check exact sizes of wheel, guessing 16 by 7 or 8, with offsets around 35, tires average $300 Prices neg, to a point. To anyone thats sms'd me and not got a reply, had to format phone, lost most contacts and msgs. Whole car being stripped, so if after anything specific, sms, or pm

Hey guys, picked up this r32 gts-t to use the motor, box loom ecu, etc etc for my cefiro. Parting rest of car out. Has had a decent hit in front, moved drivers side strut tower over a bit, rail however looks straight. Im not a panel beater though. It is not written off either. As above, im taking motor, loom, ecu, gearbox, alternator, power steer pump. Everything else is avaliable. Interior is very neat, apart from wear on steering wheel and handbrake boot. Rear quarters, boot, lights etc all in good condition, it looked like a neat example before it met its untimely death. Some prices Has stock exhaust from front pipe, rear muffler is a cannon, $250 Unknown brand front strut brace (straightend out one bracket) $50 Stock struts and springs (good for clearing defects) $200 Slotted rotors and front calipers with still heaps of pad left $300. Blitz BOV with piping to suit r32, $100, with come with blanking plate for stock bov. etc, etc, Best to call or pm if after anything specific. Alternatively, once I pull what I need out I'm after $1400 for the remaining car. Located in Nowra NSW. pm or 0400257530

Hey guys had a look through the other thread, couldn't find it. Are there any substitutes for steering column surround? Laurel? After the part that's just behind wheel, not the part that goes around lock. Cheers

What's your theory on cut down banjo bolts being a death wish? Good info otherwise, be good to see a 4wd ceffy getting round, now that's a rare car!

Sooo. Don't like my chances of this, but I have a full uras kit, copy I assume. It's in pretty good nick, front bar has couple of cracks where it attaches to guards. It's not really to my liking, I'm looking to swap for a autech kit, or maybe even stock bars plus cash adjust. On a side note, where have you guys found your autech kits? On here or yahoo Japan? then use streeter or such?

Def autech! Need to lose the uras I'm running now

Same in nsw, there's bugger all around.

Do you actually have any interest in buying the car? If you don't like the price, and have no intention buying it, why even comment. So what if the price is higher than others? A simple pm would have sufficed if you really wanted to suggest his price may be hard to acheive, instead of talking shit in his thread, at least your giving him free bumps.