R33RWKW

Deleted

Deleted post - same as above

Yeah around 12, New Garrett GT30R - $1560.00 del from Sydney (I got this from a forum member, but won the bid on Ebay where it was alot cheaper than his asking price on SAU) New HKS Lowmount Manifold - $900 del from Sydney. Nismo 550cc Injectors - (Nengun) around $950 delivered OS Giken Twin Plate $1800.00 Apexi PowerFC (Nengun) around $950.00 del Splitfire Coil Pack - $560 - del -SAU Group Buy Bosch 044 & surge tank setup in Boot - $1150approx Fitted. HKS BOV $380.00 del from Japan Supplyer $4000 spent at RacePace to install the Turbo/wastegate/Manifold/Injectors/tuning etc.. $400 - Setrab 19 row Oil Cooler & Perma-cool relocation Kit $2270.00 Whiteline/Bilest/- Complete Suspension Package from Sydneykid's group buy. $500 - GTR Bootlid & WING (included immaculate carbon fibre wing inserts) $400 - Nismo 300km/hr speedo/ - dash full unit Soon to spend more to finish car - Full Respray (except enginebay) in Polar White with a pearl through it. Plus another $500.00 to install the suspension setup. F**k This really adds up when someone aks you what you have spent. Then It will be finished and Hopefully just spending on 5000km services (and Tyres!) Cheers Chris

Hi Mate, My Full Engine Rebuild cost $6500.00. This Included all the good gear, & the block was O ringed etc... PM me if you want all the specs/parts. The extras cost (Turbo/manifold/fuel/tuning) $$$, but I got some parts very cheap, cause I shpped around and didn't hurry. Cheers Chris

Should be 0.82 turbine housing, not 0.62

Is it a series 2 motor? My car has the series 2 engine (Late - 1995 R33 GTS-T M-spec, series 1.5)

Thanks Ash, I think you are right, more likely the .82. I must have been looking at the cover size. I'm not sure if it's a 3.5dump, can't remember. I will be talking to Ben tomorrow because he want's some feedback and I'm going to change the wastegate spring, maybe the whole waste gate. What are your thoughts - Should I stick with a 50mm gate? or put a Original HKS 40mm one on? Cheers, Chris

Hi, see cordiapower's add in the For sale section. He has a New HKS lowmount cast manifold and wastegate. Cheers Chris

Hi, I would like a Battery too, if they are still available. Thanks Cheers Chris 0414703582 or PM

I will also soon be selling my Series 2 Wing with working Brakelight & the Bootlid. They are Polar White and in Great Condition. I will be booking my car in for the respray and adding my GTR Wing and Bootlid in the next week or so. Photos will be availble tomorrow, but is still on car. PM me for more details if interested. $150.00 + Post. Pick up is available. Pm or call 0414703582 Cheers Chris

Hi everyone, I have a few things still left for sale after my new mods being completed. I have a SERIES 2 R33 GTS-T ECU, IN GREAT CONDITION which has been chipped by RS YAMAMOTO. I only know that it has the speed cut removed, but not sure on what else. Before my new mods my car made an easy 213RWKW with all the std gear, except for BOSCH 044 & surge tank, SAFC2, Apexi GT Spec FMIC etc.. I will post photos tomorrow, but I will list the numbers here first: It has a RS Yamamoto Sticker (Racing Purposes only etc..) & the Nissan one with these numbers: Nissan 23710 21U60 MEC-R620 [A2} [5704] ON THE OPPOSITE END OF THE ECU (OPPOSITE PLUG INLETS) IS : MEC-R620 A2 5222 PRICE - $200.00 FIRM (+ POSTAGE) I still have my STD Injectors for sale - Great Condition ((65,000km) - $90.00 + POST I had a PM from someone who wanted my Turbo Exhaust Manifold with Heat sheild, but he hasn't repied to my emails or PM's, so I guess that is still for sale too. Great Condition - $50.00 + POST I also have a used CAT with shield if anyone wants it- FREE/BUYER pays postage or PICKUP. This was the CAT which was originally on my 3.5" Jasma Exhaust system. Condition Unknown, but was working fine before new one put on. Size 3.5" ALL PARTS ARE OFF MY 1995 R33 GTS-T M-SPEC (SERIES 2 Engine) PM me or call 0414703582. Cheers Chris

Here is the specs of my turbo for those who want to know. Cheers Chris.

Added Some extra mods that I forgot to List. - see original post.

Yep, Mine was the Polar White GTS-T with a couple of Scratches which are being fixed very soon.

Forgot to add the Screamer pipe in the mod list & it is a 50mm gate. See original post

Hi Cubes, I think it is 0.62 for the housing. I will check tomorrow. Sorry I have to go out again! Cheers Chris

Thanks guys Mods are: Full Rebuild RB25DET (Mahl forged pistons/GTR Rods/ACL Bearings/Headwork/std cams Etc... (8:5:1) compression ratio New Garrett GT30R 56T (500hp) (6 Blade wheel) (ex housing 0.82/front cover 0.6) New HKS Cast Manifold (low mount) HKS COPY 50mm Wastegate with 10psi spring (I might be replacing the whole wastegate if it gives me any trouble later with a Original HKS gate) SCREAMER PIPE APEXI Gt Spec FMIC APEXI Power FC Blitz Dual SBC (older model) Blitz Turbo Timer Viper Alarm (can't remember which model) New Nismo 550cc Injectors New SplitFire Coils New Z32 AFM K&N Induction ((Large oval Pod) Jasma 3.5" Exhaust (4"tip) New OS Giken Twin Plate Clutch & Flywheel New HKS SSQ BOV Greddy Timing Belt NGK Plugs Autometer Gauges 3 in console above cd player/ 2 in pillar mount -soon Autometer Monster tacho with Shift light Cusco Oil Catch Can Nismo Front Strut Bar with slave cylinder Stopper Teins Bridgestone Potenza's SO3 - 265/40/ ZR18 rear/235/35ZR18 front Upgraded Brakes (can't rember brand at the moment) Lenso Alloys 18" SETRAB 19 row oil cooler & Perma-Cool Relocation Kit (TO Be Installed by me & Friends) Next to arrive in the post to complete my car are: R33 GTR Rear wing & bootlid (includes Carbon Fibre GTR Side-plates on wing) Nismo 300km dash (the whole thing - a direct fit/plug&play for the GTS-T Complete Whiteline/Biliestin Suspension package (through SydneyKid's Group Buy) When that is all fitted the last thing is a full respray, except for engine bay - POLAR White with a Pearl through it. Cheers Chris

Hi, Just got my car back today from RacePace. Ben & myself are very pleased with it. I had someone sell me the wrong Spring for my wastegate - wanted 14.5 or 15psi spring but got a 25 or more? Anyway Ben had a 10psi spring and the car made 284.6RWKW @20psi. I will be putting another spring in & try for 300RWKW. The car feels great & Ben was right - It does feel like a lot more than 285. Cheers Chris

Hi Ben, I just tried your phone number twice & got 2 wrong numbers. Could you give a call back or PM me your number? I will hold the AFM for you. Cheers Chris

Other Parts now for sale: RB25DET (R33 GTS-T) AFM (USED/65,000 KM) - $15 + POSTAGE MONZA FUEL REGULATOR WITH GAUGE (NEAR NEW/5000KM USE) - $40.00+POST STD TURBO HEAT SHEILD - $10+POST Cheers, Chris

Turbo Ex Manifold - SOLD HKS BOV - NO LONGER FOR SALE

Turbo is now on HOLD. Some interest in other items.

Yeah, sorry mate I'm keeping that. Cheers.

Hi everyone, I have some parts left over after my new engine/turbo mods. All parts are in Great condition & before my mods began my Engine made 213RWKW using a Bosch 044 pump & surgetank, SAFC 2 L.E. (now SOLD), Apexi GT Spec FMIC, K&N Induction. Everything is off my 1995 R33 GTS-T M-Spec. STD Turbo - Great condition (65,000km) $300 POSTED (ON HOLD) STD Injectors - Great condition (65,000km)$100 + post STD TURBO HEAT SHEILD - VERY GOOD CONDITION - $10 + POST STD RB25DET AFM - (USED/65,000KM USE) - $15 + POST MONZA FUEL REGULATOR WITH GAUGE (NEAR NEW/5000KM USE) - $40 +POST I get my car back tomorrow & I will add anything I've Missed. Note if anyone is not happy with there purchase (i.e - If it is not in the condition as I have advertised it for) -They will get a full refund. However everything will be checked thoroughly before being sent! P.S Does anyone know when the feedback/trader ratings will be fixed?, as I have some to add to others & I have recieved a good number myself. Cheers Chris 0414703582 or pm