Nodachi

Thanks Joshm35, I've tried resetting by unplug and replug the fuse. So far it's working again.

Hey guys, My stagea used to "auto shut" rear gate even if I didn't slam the rear gate in properly. Now this feature doesn't work anymore. Is there any tips on where i should look? Thanks

Hi, Do we need slim radiator's fan for the installation?

How does these go? I brought a set and there is lots of movement after installation. It's missing a lower seats that the genuines have.

I think i might had the answer but could someone confirm, there is a cone seat for the lower ball joint, code: 40173AL500 The aftermarket kit from Ebay will not come with this.

is it possible for you to take a picture of the ball joint? Thanks

Nope, it's glued together with the rubber cap. We've tried hammer it out, pressed and it won't budge

Does anyone know the part number for M35 stagea front lower ball joint? I've brought a set from here: http://www.ebay.com.au/itm/250697175942?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649#ht_827wt_1163 put it in and there is lots of movement after the install. I've notice that the ball joint i've got is missing a "cap" that the original have on top of the rubber. Any suggestion?

Hey Scott, My Stagea currently only have left side reverse light at the back. Is it hard to convert the right for reverse light? Do you have the parts for it? Thanks

Oops forgot to add, Passenger side floor mate if it's Beige Thanks

Hi Scott, Pushing my luck but would you happen to have Cargo blind, Boot mat and the driver side power window control (the 4 switch thing) Thanks

i will check shaft first thanks all!

Should I try wheel bearing? I've recently change the right bearing when it's make heaps of noise and rough ride. They had jacked the car up and try to see if there is play and they said its okay.

I don't know where to go from here. Is there workshop that do tailshft balance?

Daleo: So that means we have 1 in 4 chances of getting shaft in the right position or is there better way to identify the problem. The workshop did the test to check for bearing issue and confirm the bearing is okay

Hey guys Got a weird problem with my m35 250rx. I.ve recently replace a seal in the outer housing unit in the rear transfer unit as it was leaking. Ever since it came back from the mechanic, the car had a weird roughy ride after 60km and become very noticable traveling more than 100km where the the steering had a slight vibration and very noticeable noise. I've since taken the car back but they can't seem to find the problem. We had rebalanced the tyres, swap with the back to front. Done alignment twice at two different places. I had since taken the car to another mechanic and he checked the front assembly and they said there is nothing wrong. Lately I've notice that the front left brake makes an annoying click/rubbing noise when braking close to a stop. When going downhill braking the car wobbles under brake but I am not sure if this is related. I was told that tyres could be the problem but both workshop says the tyres are good. They check bearing and it's okay. One of the bushing in the front left lower connected appears to be on it's way out so I am not sure what to do. Any suggestion? Rear shaft out of balanced?