konect

That's a mighty fine rear bumper you've got there sir

Forgot to add that it's a sunroof cage...bit cheaper than some others getting around

+1!

See a couple floating around... Dan's in his backyard haha Ontryl's when I used to live in Berwick Stock one on the gold coast a few weeks ago Gold one around Warrandyte a couple of times I would estimate the number at ~100, but still I can't get a rear bumper lol

Dashmat came with the car man, no idea where its from originally :S also... Price droppage! $500 OR $400 if you have a stock rear bar!!! Can't get much cheaper than that

Price droppage! $500 OR $400 if you have a stock rear bar!!! Can't get much cheaper than that

Hey all, Got the cage out of my ceffy for sale as I don't really want to put it back in. It is the good one that follows the door line before dropping down so you can still take passengers in the back! Had a couple of people PM me about it but then magically disappear when I said I would sell it Selling for $650 or $550 if you have a cefiro stock rear bumper to trade. Located in SE Suburbs of Melb and wont post due to funky shape. I can be contacted on 0412 033 449.

Haha I have a front bar! Guys im still trying to get rid of this thing as its gathering grass on the lawn! $400 + a stock rear bar or $500 take it away DO...IT.

I always use the Cooper equivalent as I've heard some bad things about Ryco filter quality. In regards to the oil, I run Penrite Syn 5 10w60 (I think) as I figure my old motor would appreciate the thicker oil at high temps. In my old car I had clicking at high RPM and tried heaps of oils and this one was the only one that reduced the noise so I've stuck with it

Hey all, Got the cage out of my ceffy for sale as I don't really want to put it back in. It is the good one that follows the door line before dropping down so you can still take passengers in the back! Had a couple of people PM me about it but then magically disappear when I said I would sell it Selling for $650 or $550 if you have a cefiro stock rear bumper to trade. Located in SE Suburbs of Melb and wont post due to funky shape. I can be contacted on 0412 033 449.

Sure will, PM sent

So it was recommended to me that to rekindle my love for the Cefiro I should give it a wash and polish (for the first time in a year of owning it). Utilising my day off work for Uni exam study, I went and polished it up...bit of a difference hahaha! You may notice something missing in these pics...A FKN REAR BUMPER Before: After:

PM Sent. If anyone has a stock bar in VIC I'm still looking and willing to drive anywhere in the state to pick it up!!

Rail sold, others still available.

Looks sick with the new rims!!

bumpies.

BTW the Z32 is $240 not $250

Hi all, I am selling my Cefiro so I no longer require these parts. BRIDE Passenger seat rail (bottom mount) - $100 Notes: It's missing the adjuster so pick it up for a bargain price! Z32 AFM with plug - $250 ($340 with the below Apexi pod) Notes: Bought this a while back with plans to install but no longer need it. Comes with plug and mesh is in PERFECT condition both sides (looks almost new!). NEW Apexi Power intake (80mm) - $120 ($340 with the above Z32 AFM) Notes: Unused, bought to go on Z32. NEW GKTech RB20-25 cam gear (Silver) - $190 Notes: These are brand new and in the box and selling for same reason as the Z32. Parts are located in St Kilda East and will not post because I don't have time. I can be contacted on 0412 033 449 or via PM. Thanks.

Lol top driving skills! Yeh im going to leave it on the car now as sell as a package, makes the car look so good haha

You know what that car needs? A dash mat

Hey all, I have the pictured BRIDE passenger rail which came off the old copy Recaro I had in my car. It's never had an adjuster on it so I assume it came off at some point in its history but it can be adjusted by hand before its attached or it shouldn't be too hard to make up a U shape bar to fit. These usually sell for around $200+ so I've got this one up for $100. I'm sure an adjuster can be made for much less than $100 Located in East St Kilda, contact me on 0412 033 449 or via PM. Konect.

Hey guys, Going to chuck my car up for sale as I don't really get to use it these days. I have only owned this car for a year and have had it registered since February this year (this was new rego and the car went through the VicRoads inspection). It was built by a guy in Perth using all Jap brand parts (see below) about 3-4 years ago now so has a few scratches here and there but the parts are in TOP condition. I am looking for $14,000 and have some new parts for it which aren't yet fitted (z32, cam gear, apexi pod etc). I have made it negotiable however I'm not going to sway too much from the set price so please refrain from low balling Mods: EXTERIOR: CA31 Chassis - July 1989 Build Manual conversion Final Konnexion Body Kit - Genuine Kit - Only kit of its kind in Australia! M-Sports 30mm Flared & Vented Front Fenders - Genuine Rear Guards Flared by 20mm Full Respray in factory Diamond Black Factory Sunroof Late Model Tail Lights Kaixon 6000k HID Headlight Kit Legal Tint with Front Banner Notes: Bodykit was drifted by the guy I bought it off and is in good condition except for the rear passenger skirt but is an easy fix, just needs some glassing. Drivers door has a scratch from when the front bar came off. Small blemishes but otherwise excellent condition. ENGINE: RB20DET - Recently changed over after Bee*R limited destroyed a piston (FYI - Bee*R limted was not refitted ) HKS GT2835 Ball Bearing Turbo Kit (highflowed) ONLY 2500km since rebuild! (Went bang with old motor) HKS Tuned Length Stainless Highmount Manifold HKS 50mm Race Gate (1 Bar spring installed, other springs come with it) Xtreme Chrome Moly 5.5kg Flywheel Xtreme 9 Puck 25% Over Standard Clutch SplitFire Coil Pack Kit R32 GTR Coilpack Loom Braided Lines where necessary, Fire Retardant Shields on All other Lines 3" Dump Pipe w/ Heatwrap 3" Turbo Back Exhaust. East Bear GTR Cooler Kit & Piping Custom Stainless Intake Cross Pipe (By C-red Tuning) R33 GTR VSpec Intercooler (painted black) Trust 10 Row Oil Cooler w/ Braided Lines & Spin on Adaptor (painted black) Bosch O40 Fuel Pump with Source Power direct from Battery New rocker cover gasket (2000ks old) Z32 AFM (Not yet fitted) Cam gears (Not yet fitted) Solid Steering shaft spacer (not yet fitted) Nissan Steel Exhaust Header Gasket w/ new Nissan Studs and Brass Nuts Quality Blue Silicon Used on all joins and bends Silicon Vacuum Hoses Silicon Radiator Hoses Razor Grounding Kit Oil Catch Can Retuned Standard ECU - Socketed ROM (in Japan) Had car dynoed recently and made 192rwkw on stock boost. Needs about 1.2bar to make serious power. DRIVETRAIN: 2-Way Mechanical Diff (Nice and quiet) Gearbox Had 6 Bearings Replaced (Synchros are crunchy which 'may' be caused by slave cylinders not opening fully) R32 Half Shafts installed HPI Braided Clutch Line Brand New Speedo Cable UNDERNEATH: Tein HA Coilovers (Purchased brand new in 04, 35,000km old now with no leaks or clunks) Tein Castor Rods Castor Rod Mount Brace Cusco Front Strut Brace Adjustable Traction Rods in Rear Adjustable Upper Arms in Rear HICAS Lock Back Drift Pineapples on Rear Cradle Desmond Regamaster 17 x 8 (Lightweight) and 17 x 9.5 Brand new Falken 452 on the front and good tread Federal SS595's on the rear Full 5 Stud Conversion, R32 Rear & Custom Billet Front Hubs New rotors and pads all round (2000 ks old) 20mm 5 Stud Bolt on Hub Centric Spacers on Front Z32 4 Pot Brakes & R32 2 Pot Rears in Red (replaced Rear Brake Lines) S14 Steering Rack & Custom Power Steering Lines INTERIOR: Sexual dash mat (extremely rare!) HKS EVC3 Boost Controller Greddy Boost Guage Defi Din gauges (Oil Temp, Pressure, Water) 6 Point Achieve bolt in roll cage (Not fitted) Nardi Turino Steering Wheel Bride Zeta II (Driver) Stock S13 (Passenger) Razo Gearknob Pioneer MP3 Head Unit Pioneer 6" Splits That's the gist of it I think. Only been drifted a few times and has heaps of potential to make big power (est at around 250 rwkw with a tune and the parts I haven't put on yet) Car is fully complied and VIN plate fitted. Currently has 6 months rego so will be a lovely slider for anyone who is keen. I can be contacted on 0412 033 449. Located in Narre Warren.

How it should be done....if you want to get defected every 5 minutes

no.

Lol it would add $400 to the price to post because of its bulky size otherwise I would.